|
[China]
Trade Verify
Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Contact name:Michael Guo
E-link China Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Audio , Ethernet , Tally , Intercom & Return Video 3G SDI to Fiber Optic Converter
Overview
The LNK-MSDI Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to transmit 10/100 Base-T Ethernet RS422, Audio, Ethernet, Tally, Intercom & Return Video over single mode or multimode fiber. All data channels are available simultaneously. The system transports a 3G/HD-SDI signal from the camera to the Base Station and a return video (3G/HD-SDI), Remote control data, genlock, intercom, tally, audio and 10/100M Ethernet are also provided. The system puts all of the signals needed for multi-camera 3G/HD-SDI production onto a SM/MM tactical or SMPTE hybrid fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.
Features
Applications
Technical Indexes
| General Specifications | |
| Work Temp | -10°C to +75°C |
| Storage Temp | -40°C to 85°C |
| humidity | 0 ~ 95% (non-condensing) |
| Input power | DC5V 3A |
| Power consumption | 15W |
| Net weight | 4kg |
| Appearance size | 172mm*167mm*45mm (LxWxH) |
| Optical Fiber | |
| Wavelength | 1310nm / 1550nm / CWDM |
| Output Power | -6~-1dBm |
| Rx sensitivity | <-18dBm |
| Transmission Distance | SM fiber 10+km , MM fiber 300m |
| Optical connector | Dul LC /FC/ST/SC/MX/ Lemo / Neutrik (optional) |
| SDI input/output | |
| Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
| Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
| Cable Equalization | Automatic cable EQ (Belden 1694A cable) |
| 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s | |
| SDI interface | BNC 75 Ohm |
| Intercom | |
| Camera Optic Adaptor | |
| Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
| Microphone | Mic inputs with mute and pre-amps |
| Headphone | with volume up or down |
| Audio | Balance or unbalance line level |
| Tally | |
| Camera Optic Adaptor | |
| Interface | 4pin air head or 3pin mini XLR |
| Output | Dry Contact Closure or wet +12V |
| On: short or +12V | |
| Off: open or 0V | |
| Remote Control | |
| Interface | Terminal Block of Industrial Standard |
| Data | RS422 /RS232/RS485 |
| Ethernet | |
| Port | 10/100 Base-T, RJ-45 connector |
| Work mode | Full duplex/half duplex |
| Data Rate | 10 Mbps & 100 Mbps Ethernet (Auto Adaptive) |
For data input and output connections, please note the following pin assignment:
Pin Assignment (Screw Terminal Block) Data format | 1 | 2 | 3 |
| RS422 (3-Wire) | GND | IN/OUT+(A) | IN/OUT-(B) |
3-Wire RS422 Full Duplex Data communication connection diagram:
Transmitter End Receiver End
| User’s Equipment | DATA PORT (3-PIN) | DATA PORT (3-PIN) | User’s Equipment | |||
| GND |  | 1GND | 1 IN(+) |  | TX(+) | |
| IN/OUT+(A) | | 2 IN(-) | 2 IN(-) | | TX(-) | |
| RX(+) | | 3 OUT(+) | 3 OUT(+) | | RX(+) |
