Active Member
|
[China]
Address: 3 / F, Building A, Zhuolin Industrial Zone, Yankeng, Shiyan Town, Bao 'an District, Shenzhen City, Guangdong Province, China
Contact name:Jinsheng
shenzhen jie teshin communications equipment co. ltd |
|
|
Multimode OM4 50/125 24 core MPO 10m Fiber Cable Equipment interconnection
Description:
MPO connectors feature male and female connector design.
The MTP / MPO connectors can be mass terminated in combinations of
4, 8, or 12 fiber ribbon cables. The MPO Adapter comes standard in
black.
OM3 fiber comes with an aqua color jacket. Like the OM2, its core size is 50 µm, but the cable is optimized for laser based equipment. OM3 supports 10 Gigabit Ethernet at lengths up to 300 meters. Besides, OM3 is able to support 40 Gigabit and 100 Gigabit Ethernet up to 100 meters, however, 10 Gigabit Ethernet is most commonly used.
The real difference between OM3 and OM4 multimode cable is that OM4 provides a higher modal bandwidth--4700 MHz·km compared to 2000 MHz·km for OM3. This means that OM4 can transmit more information within the same distance.
MPO to MPO 8 Fiber – Most commonly used to establish 40G (40GBASE-SR4) links in between two QSFP+ transceivers. Additional applications include creating back-end trunk connections. Although higher density 12 fiber connectors are preferred.
MPO-MPO 12 Fiber – Among the most popular multifiber count to use when interconnecting high density patch panels. MPO 12 fiber connectors are abundantly found in the field and remain the connector of choice for most applications. Each 12 fiber MPO connector is able to establish a single 40G link. But are more often used to establish back end trunk connections.
MPO MPO 24 Fiber – The introduction of parallel optics has enabled much faster data transmission rates and highlighted the need for high density connectors. The 24 fiber MPO connector is able to deliver three individual 40G links. This includes a single 100G link, or a 120GB link using QSFP+ & CXP transceivers. In order to accommodate clients wishing to run at 40G while providing a simple upgrade path to 100G, 24 fiber and higher count cables are available in two convenient configurations. For example, a single 24 MPO fiber cable may be ordered with a single set of 24 fiber connectors, or a set of two 12 fiber connectors. This allows a network architect to consolidate large multifiber assemblies into a single harness. While simultaneously ensuring full compatibility with the most popular devices and cutting edge equipment.
Features:
Low insertion loss and back reflection loss
Ferrule end surface pre-domed
Free-floating ceramic ferrule
Clips are avaliable for SC and LC duplex connector.
Good exchange ability and good durability
The connector can be supplied as a pre-assenbled one piece or one
piece or as connector kit.
Application:
CATV
Active device termination
Telecommunication networks
Metro
Test equipment
Premise installation
Local Area Networks (LANs)
Data processing networks
Wide Area Networks(WANs)
Item | Connector Description | Item | Connector Description |
| PC/UPC/APC |
| PC/UPC/APC |
Connector Singlemode 9/125 | ST | Connector Multimode (50/125 or 62.5/125) | ST |
SC | SC | ||
FC | FC | ||
LC | LC | ||
MU | MU | ||
MTRJ(female) | MTRJ(female) | ||
MTRJ(male) | MTRJ(male) | ||
DIN |
| ||
|
|
| Parameters | Standard Fiber Cable Assemblies | |
| Fiber Type | SM(G.652/G.657A) | MM(OM1/OM2/OM3/OM4) |
| Jacket Materials | LSZH/OFNR/PVC | |
| Connector Type | SC/LC/ST/LC/MU/MTRJ/MPO/E2000 | |
| Ferrule Materials | Ceramic | |
| Testing Wavelengths | 1310±30/1550±30nm | 850±30/1300±30nm |
| Insertion Losss(dB) | ≤ 0.3dB | ≤ 0.3dB |
| TIA/EIA-455-107 | (PC/UPC/APC) | (PC/UPC) |
| Return Loss(dB) | ≥45dB(PC/UPC) | ≥35dB(PC/UPC) |
| TIA/EIA-455-107 | ≥55dB(APC) | |
| Exchangeability | ≤ 0.2dB | |
| Cable Assemblies | Pigtail/Simplex/Duplex/Fan-out Patchcord | |
| Operating Temperature (° C) | -10~ + 70 | |
| Storage Temperature (° C) | -40 ~ +85 | |
| Package | 1unit/bag | |
Question and answer:
1. What is your MOQ?
Otop : Normally is 1pcs/item,could be coordinated if you have
detail requirements.
2. How about your delivery date?
Otop: Delivery date is about 3-5days, it depends on the order
quantity.
3. Can you supply sample for customers?
Otop: of course, however the delivery cost will be charged on
customer's account.
4. How about your price?
Otop: We are supplying products with very competitive price based
on good performance.
5. Do you offer OEM Service ?
Otop: We accept OEM, ODM. The cable size and material are
customized. Our own logo and own design are welcome. We will
produce
