|
[China]
Trade Verify
Address: Jinhui Building, No.68, Zhongtang Section, Guansui Road, Zhongtang Town, Dongguan City, Guangdong Province
Contact name:Coco zhou
Dongguan Wirecan Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
I-suntop copper wire drawing machine20220301.pdf
GF-24DT Fine copper wire drawing machine with online annealer is used to draw and anneal single bare copper wire from 0.5mm-1.0mm to 0.25mm-0.08mm. Along with annealer, the finished conductor wire with annealing process can be used for next process stranding or extrusion.
| Machine type | GF-28DW |
| Control system | Traditional analog type/digital control with production record |
| Outlet diameter | 0.1mm-0.5mm |
| Inlet diameter | φ0.8-φ1.6mm |
| Max line speed | 2500mpm/max |
| Dies NO. | 28 |
| Slip ratio of m/c | 14%+8% |
| Frame | Iron plate welding annealing treatment |
| Drawing capstan | Tungsten |
| Spooler bobbin size | O.D.φ300mm/max |
| Bobbin loading&unloading type | Shaft type |
| Max loading capacity | 50KG/MAX |
| Reverse system | PID synchronous control spool |
| Transmission | Triangle belt+Timing belt+Flat belt |
| Pay-off method | Over-head |
| Tension control | Weight balance by swing arm |
| Lubrication type | spray, Grade 2.5%-3%, Capacity 40L/min |
| Brake | Pneumatic brake |
Name | Quantity |
1. Pay-off shelf (Wire tangle auto stop device) | 1 set |
2. GF-28DW Fine copper wire drawing machine | 1 set |
3. Bobbin Unloading device | 1 set |
4. Spare parts | As per List |
