FA-VC309, Car Diagnostic Scan Tool, OBD-II Fault Code Reader, with Cable and Screen, Red

FA-VC309, Car Diagnostic Scan Tool, OBD-II Fault Code Reader, with Cable and Screen, Red

Product Introduction:

The FA-VC309 OBD II Scan Tool is specially designed to work with all OBD II compliant vehicles, including those equipped with the next-generation protocol-Control Area Network (CAN). It is required by EPA that All 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all Domestic, Asian and European vehicles.

A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label which is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate "OBD II Certified". Additionally, Government regulations mandate that all OBD II compliant vehicles must have a "common" sixteen-pin Data Link Connector (DLC).

For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.

Features of FA-VC309 OBD II Scan Tool:

1, Work with all 1996 and newer vehicles that are OBD II compliant (including CAN)

2, Read and clear generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turn off check engine light

3, Support multiple trouble code requests: generic codes, pending codes and manufacturer specific codes

4, Review the emission readiness status of OBD monitors

5, Determine the malfunction indicator lamp (MIL) status

6, Retrieve VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9

7, Easy to use with one plug-in

8, Free CD software with over 7000 DTC definitions

9, No batteries needed-powered via detachable OBD II cable

Specifications:

Display: Backlit, 128 x 64 pixel display

Operating Temperature: 0 to 60 ^oC (32 to 140 Fo)

Storage Temperature: -20 to 70 ^oC (-4 to 158 F^o)

Power: 8 to 18 Volts provided via vehicle battery

Dimensions:

Length x Width x Height: 109.2 mm (4.30") x 66.9 mm (2.63") x 17.6mm (0.69")

NW: 0.12 Kg (0.26lb), GW: 0.15Kg (0.33lb)

Packing detail:

1x VC309 Scan Tool

1x User's Manual

Please browse http://www.fiberall.net for more information and please contact sales@fiberall.net or sales@fiberallchina.com for more detail.