Jiangsu Feiteng ship matching Engineering Limited company
specialized production: single oil filter CBM1133-82
This product is applicable to the work of marine fuel temperature ≤
80C0 and oil pipe line.
Design and manufacturing of products is based on the industry
standard CBM1133-82, combined with the requirement of modem design
is improved, the formation of the company's 594NTDF1Y series
product.
The oil filter cover and the filter cylinder body, the material is
Q235-A, the filter material is 1Cr18Ni9Ti; oil filter strainer
tube. The effective area and the nominal diameter of the ratio of
cross-sectional area of not less than 5; for the oil filter oil
medium with magnetic block, materials for the AINiCo5 filter; oil
tightness test and strength test, the pressure of 0.75MPa, duration
of not less than 5min, should be no leakage; oil cavity filter
cleaning after cleaning antirust oil, the outer surface is coated
with anti-corrosive primer and light grey finish every once;
Filter type
S -- flange dimensions according to the straight single oil filter
CB/T46;
LA -- flange size according to the right angle CB/T46 single chain
oil colander;
LB -- flange dimensions according to the left type right angle
CB/T46 single chain oil colander;
SS -- flange dimensions according to the straight single oil filter
GB2506;
LAS -- flange size according to the right angle GB2506 single
strainer;
LBS -- flange dimensions according to the left type right angle
GB2506 single oil filter;
