Yangzhou cruise ship accessories factory specializing in the
production of single oil filter: CBM1133-82
This product is applicable to the ship fuel temperature is less
than 80C0 and oil pipe lines.
Product design and manufacturing is based on the ship industry
standard CBM1133-82, combined with the requirements of modern ship
design, the formation of the company's 594NTDF1Y series of
enterprise products.
Single joint oil filter body, a cover and a filter cartridge for
Q235-A, single joint oil filter strainer material for 1Cr18Ni9Ti;
single joint oil filter strainer filter cartridge effective area
and the nominal through diameter cross-sectional area ratio of not
less than 5; for lubricating oil filter oil medium added magnetic
block, the material is AINiCo5; oil filter density test and
strength test, pressure 0.75mpa, duration of not less than 5min,
should be no leakage; oil filter is arranged in the inner cavity of
the rust cleaning antirust oil, the outer surface is coated with a
rust inhibiting primer and light grey finish each once;
Type of filter
S type - a straight - pass filter with a CB/T46 - shaped flange
connection;
SS type - a straight - pass filter with a GB2506 - shaped flange
connection;
LA type: the right type right angle single oil filter with CB/T46;
LB type: the flange connection size according to CB/T46's left type
right angle single oil filter;
LAS type: the right type right angle single filter with GB2506;
LBS type: the flange connection size according to GB2506's left
type right angle single oil filter;
Parameters for filter
Single - linked oil filter, single - linked oil filter, cast iron
single - linked oil filter are a product of marine oil filter!!