0.37kw 1.7m2 Heating Melting Pot Fertilizer Plant Equipment

                                                   Multi-Functional Industrial 0.37kw Melting Pot For  

Introduction of Multi-Functional Industrial 0.37kw Melting Pot For Fertilizer Production

The melting pot is suitable for food, drink, medicine, chemical industry and other industries, such as intermediate buffer, liquid storage, mixing, blending, etc., this product is well stirred, high efficiency, easy to operate. It is a point to use the heat source and environmental protection. The top feed inlet is convenient to feed, and the observation hole is simple. The barrel is equipped with a liquid level meter to observe the storage of liquid. The compound electric heating unit, the lower part of the metering pump and the outlet pipe, the discharge outlet, the thermonuclear and the transmission part are the intermediate transmission of the cyclonic needle wheel reducer. All the contact materials are 304 stainless steel and all surfaces are treated.

Advantages of Multi-Functional Industrial 0.37kw Melting Pot For Fertilizer Production

1. The melting pot quality has been improved obviously, the quality index conforms to the standard of gb15063-2009, the particle is round and smooth, the compressive strength is increased, the fertilizer has good water solubility and low moisture content, and the caking problem of compound fertilizer is alleviated by spraying anti-caking agent.

2. As the moisture content of the material is about 3%, the drying load is reduced and the drying capacity of the dryer is improved. Compared with other processes, the average yield increase rate is 30-50%.

3. Urea was dissolved by the low-temperature rapid melting method. Urea was dissolved rapidly at 110-125 ℃ without adding water. The concentration of urine was not less than 99% and the increase of biuret content was prevented.

Parameter of Multi-Functional Industrial 0.37kw Melting Pot For Fertilizer Production

FAQ

1. Q: Can the logo or company name to be printed on the products or package?
A: Sure. Customer's logo or company name can be printed on products by stamping, printing, embossing, coating or sticker.

2. Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.

3. Q: How does your factory do regarding quality control?
A: Quality is the priority. We always attach great importance to quality control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.

4. Q: What is your warranty terms?
A: We offer different warranty time for different products. Please contact us for detailed warranty terms.

5. Q: Will you deliver the right goods as ordered? How can I trust you?

A: Yes, we will. The core of our company culture is honesty and credit. Also, you can check our Alibaba Site, there is several importers' transaction History.

6. Q: What's the payment you accept?
A: As usual our payment is 30%T/T as deposit and the 70% balance against the copy of B/L. Also, we accept the payment such as L/C, Escrow Or PayPal.