Home Companies Shenzhen Feihuan Medical Instruments Co., Ltd

Nickel Titanium Rotary Endodontic Files , High Torque Strength Vortex Blue Rotary Files

Active Member

Contact Us

[China]

Address: 1305,Wensheng Center, Wenjin Sq., Tianbei 1st Rd., Luohu District, Shenzhen City, China

Contact name:Eileen Li

Shenzhen Feihuan Medical Instruments Co., Ltd

Nickel Titanium Rotary Endodontic Files , High Torque Strength Vortex Blue Rotary Files

Country/Region	china
City & Province	shenzhen guangdong

Product Details

CM Wire V Taper Endo Rotary Files For Root Canal Treatment(compatible with Vortex Blue)

V-Taper	Size/Taper	Toque(G-CM)	Speed(RPM)	Color
	#15/.04	75	500	white
	#20/.04	75	500	yellow
	#25/.04	104	500	red
	#30/.04	104	500	blue
	#35/.04	132	500	green
	#40/.04	132	500	black
	#45/.04	132	500	white
	#50/.04	132	500	yellow
	#15/.06	195	500	white
	#20/.06	195	500	yellow
	#25/.06	290	500	red
	#30/.06	290	500	blue
	#35/.06	368	500	green
	#40/.06	368	500	black
	#45/.06	368	500	white
	#50/.06	368	500	yellow

Operation Sequence

– Establish patency by taking a #10 K-File past the canal terminus, and at least a #15 K-File to the terminus.

--In small canals (mesials/buccals of molars, small premolars and lower anteriors) start with a 30/.04 rotary file. Take 30/.04 to resistance or working length (whichever occurs first). If resistance is encountered before working length is obtained, go to next smaller instrument following the same protocol until working length is achieved. Between each rotary file recapitulate with a #10 or #15 tip hand file to maintain glide path and help irrigate (NaOCl) to the canal terminu

– In larger canals (palatal/distals of molars, larger premolars, upper anteriors) begin with a 40/.04 rotary file. Use the crown down technique to resistance or working length. If resistance is encountered before working length is achieved, move on to smaller sized instruments until working length is achieved. Between instruments, recapitulate with small hand instrument to maintain a glide path to working length.

V Taper properties

V Taper utilizes a unique approach in wire processing that increases cyclic fatigue resistance and improves torque strength. Due to this proprietary processing, V Blue files may appear slightly curved, as demonstrated in the image below. This is not a manufacturing defect. While the file can be easily straightened using only your fingers, it is not necessary to straighten the file prior to use. Once inside the canal the V Blue file will follow the anatomy, conforming to natural curvatures

Advantage

Minimum of 65% improvement in cyclic fatigue resistance over M-wire NITI

Minimum of 99% improvement in cyclic fatigue resistance over standard NITI

Maximum results up to 353% better