Home Companies Ohmalloy Material Co.,Ltd

Solid PVC Thermocouple Extension Cable Type T For Electrical Equipment

Ohmalloy Material Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: Room 311, No.1211, Mudanjiang Road, Baoshan district, Shanghai

Contact name:Qiu

Inquir Now

Ohmalloy Material Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Solid PVC Thermocouple Extension Cable Type T For Electrical Equipment

Country/Region china
City & Province shanghai shanghai
Categories Power Cables
InquireNow

Product Details

Type T Thermocouple Extension Cable

 

Conductor specification

TYPE T (Copper vs Constantan) is used or service in oxidizing, inert or reducing atmospheres or in vacuum. It is highly resistant to corrosion from atmospheric moisture and condensation and exhibits high stability at low temperatures. It is the only type with limits of error guaranteed for cryogenic temperatures.

 

1. Chemical Composition

MaterialChemical composition (%)
NiCuSiIronAl
TP(Copper) 100   
TN(Constantan)4555   

 

2. Physical Properties and Mechnical Properties

 

 

Material

 

 

Density(g/cm3)

 

Melting point(ºC)

 

Tensile Strength(Mpa)

 

Volume resistivity(μΩ.cm)

 

Elongation rate (%)

TP(Copper)8.91084>1961.71(20ºC)>30
TN(Constantan)8.81220>39049.0(20ºC)>25




In actual temperature measurement, usually there are long measuring distance with the measuring device, a thermocouple compensation wire is generated to compensate the temperature difference caused by the temperature change between the measuring device and the thermocouple connecting piece.

 

The compensation cable has the following advantages: improving thermocouple temperature measurement line physical properties and mechanical properties; improving the measurement line flexibility and making the connection convenient by using multi-strand core or small-diameter compensation wire; easy to shield external interference; reducing measuring lines cost.

 

Thermocouple Cable Grade

A:Extension Grade Cable

Whose wire composition is totally as the same as the thermocouple wire, remarked by the letter"X"after the thermocouple symbol number, such as"KX""JX""TX"

B:Compensation Grade Cable

Whose wire composition is different from the thermocouple wire, but its wire electromotive force (EMF) value is the same as thermocouple wire only at 0-100ºC or 0-200ºC. It remarked by the letter"C"after the thermocouple symbol number, such as"KC""JC""TC"

  1. For cost consideration, when the tested temperature under 200ºC, compensation grade cable is preferred. But compensation grade cable will occur enormous tested temperature value deviation if the tested temperature above 200ºC. The higher the tested temperature, the greater deviation be.
  2. For compensation grade cable, the max testing temperature is less than 200ºC, the bigger the cable, the smaller the signal loss.
  3. Extension cable and compensation cable comparison:

 

PerformanceExtension GradeCompensation Grade
MaterialSame as thermocoupleDifferent from thermocouple
EMF Value FeatureSame as the thermocouple's at certain temperature rangeSame as the thermocouple's
Deviation CurveNonlinear, varies with temperatureLinear
Working Temperature RangeLimited(usual at 100ºC)Unlimited(depend on insulation material temperature bearing)
Line ResistanceLow resistanceHigh resistance
Compensation Contact InterferenceDifferent contactor material may cause interferenceNone
AccuracyLowHigh
PriceLowHigh(about 1-2 times higher)

Hot Products

FeCrAl wire OCr23Al5Ti resistance alloy wire for heater coils Common Name OhmAlloy135B is a iron...
0Cr21Al6Nb High Temperature Alloys 0.8mm For Chamber / Tuber Furnace Oven OhmAlloy145 (Common Name...
Fe Base Heating Wire OCr21Al6Nb FeCrAl alloy 1mm~8mm heating resistance wire for braking resistor ...
High quality 0.09mm FeCrAl21/6Nb supplier 0Cr21Al6Nb wire AWG 22 -40 Product description Oxidized ...
Factory price FeCrAl21/6Nb FeCrAl Alloy AWG 22 - 40 for three-way catalyst Product description ...
Stable resistivity FeCrAl21/6Nb FeCrAl Alloy AWG 22 - 40 for industrial usage Product description ...