|
[China]
Trade Verify
Address: No.57 Zhangjia,Shennan District,Shengang Street, Jiangyin City,Jiangsu,China
Contact name:Chen Chery
JIANGYIN SNYNXN GRANULATING DRYING EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Product Name: GLP centrifugal spray dryer
Automatic Centrifugal GLP 5 Spraying Dryer
Description
This machine is widely used in the liquid shaping technology and drying industry.Lt is most suitable for producing powder, particle solid products from materials of solution, emulsion, solidus and culpable paste states, Therefore, when the particle size of the distribution final products, the residual water contents, the stocking density and the particle shape meet the precision standards, the centrifugal spray dryer is one of the most desired technologies.
Features
1. Particle size (50μm - 400 μm) and particle shape, strength and
flowability can be controlled.
2. Wide range of nature of liquid is applicable
3. Can start-up without trouble and be full automatic
4. Running cost can be reduced
5. Hygienic and compact
6. Powder is agglomerated in one machine so that high flowability
and quality product with less dust emission will be produced
7. Can be used as conventional spray dryer without fluid bed
8. Combination of drying chamber and fluid bed can agglomerate the
materials which is difficult to agglomerate.
9. CIP is available
10. Agitator at the bottom of fluid bed is available
11. Patent Air assisted pressure nozzle is available
Follow-up,meintenance,and equipment diagnostics, we can respond
quickly to requests about malfunctions, and repairs, etc. Since our
products are intended to be used indefinitely after they are
delivered regular maintenance is essential. We are strongly focused
on maintenance. We also recommend regular equipment diagnoses to
prevent malfunctions.
Technical parameters
Model | 5 | 25 | 50 | 100 | 150 | 200-10000 |
| ºC Inlet temperature | 140-350 140-350 automatic control | |||||
| ºC outlet temperature | ~80-90 | |||||
| kg/h Maximum moisture evaporation | 5 | 25 | 50 | 100 | 150 | 200-10000 |
| Centrifugal spray head drive | Compressed air drive | mechanical drive | ||||
| (r.p.m) speed | 25000 | 18000 | 18000 | 18000 | 15000 | 8000-15000 |
| (mm) Spray disc diameter | 50 | 100 | 120 | 140 | 150 | 180-340 |
heat source | electric | + Electricity + steam | +, Electricity + steam, fuel, gas | Resolved by the user | ||
| kW Maximum power of electric heating | 9 | 36 | 63 | 81 | 99 | |
| L×W×H(m) Outline dimension | 1.8×0.93×2.2 | 3×2.7×4.26 | 3.7×3.2×5.1 | 4.6×4.2×6 | 5.5×4.5×7 | Determined according to specific circumstances |
| % Dry powder recovery | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 |
Advantages
1 .High speed of drying. After the spraying of the material liquid,
the surface area of the material will be increased greatly. In the
hot-air flow,95%-98% of water can be evaporated at the moment.The
time of completing the drying needs only several seconds.lt is
especially suitable for drying the heat sensitive materials.
2. Ats final products own the good uniformity, mobility, and
dissolving capacity. And the final products are high in purity and
good in quality,
3. The production procedure is simple and the operational control
easy. The liquid with the moisture contents 40-60% (for special
materials, The contents may reach 90%.)can be dried into powder or
particle products at a time. After the drying, there is no need tor
smashing and sorting, so as to reduce the operation procedures in
the production and Chance the product purity .The product particle
diam enters, looseness and water contents can be adjusted through
changing the operation condition in a certain scope, It is very
convenient to carry out the control and management.
Outlines
1. Atomization: Atomizing system must ensure a uniform distribution
of the fog drops, which is crucial to ensure a good qualified rate
of products.
2. Contact of hot airflow and fog drops: When enough hot air enters
into drying tower, the direction and angle of hot air flaw have to
be considered, no matter co-current flow, adverse current or mixed
flow, must ensure the sufficient heat exchange, it is crucial.
3. The angle design of pipelines and cone: Lt is very important to
select the suitable angle, here we would like to share our
experience and data from production of thousands of this equipment.
Principle of work
After filtering and heating, the air enters air distributor at the top of the dryer. The hot air enters the e drying chamber in the spiral form uniformly. By passing through the high-speed centrifugal atomizer at the top of the tower, the material liquid will be rotated and sprayed into extremely fine mist liquid beads, Through the very short time of contacting with hot air, the materials can be dried into the finished products. The finished products will be discharged continuously from the bottom of the drying tower and from the cyclone separator.The waste gas will be discharged by blower.
FAQ
Q: Delivery period:
A: Around 15-60 days, delivery perious will vary as different types
of machinery,
