Home Companies Wenzhou Goldtop Valve Co.LTD

ANSI B16.34 B16.5 Forged Steel Valve , Welded Gate Valve Gasket Spiral Wound

Active Member

Contact Us

[China]

Contact name:Jerry Li

Wenzhou Goldtop Valve Co.LTD

ANSI B16.34 B16.5 Forged Steel Valve , Welded Gate Valve Gasket Spiral Wound

Country/Region	china
Categories	Valves

Product Details

Integral Flanged Forged Steel Gate Valve For Industrial High Temperature

Brief introduction:

Integral flanged valves are available in three bonnet designs.

The first design is the Bolted Bonnet, with malefemale joint, spiral wound gasket, made in

F304L/graphite.Ring joint gasket are also available on request.

The second design is the welded bonnet, with a threaded and seal welded joint. On request a

full pen- extraction strength welded joint is available.

The third design is the pressure seal bonnet, with a threaded and pressure seal joint. Integral Flanged

end valves are available in gate, globe, piston, check, and swing check design configurations.

Technical Specification

* Integral flange valves conform to API 602,and ANSI B16.34.

* Each is tested according to API 598, and marking is per MSS SP-25.

* Full Port and Conventional Port

* Face to face according t ANSI B16.10

* Flanges according to ANSI B16.5

* Pressure seal bonnet

* Outside Screw and Yoke (OS & Y)

* Two piece self-aligning packing gland

* Integral backseat

* Integral body flanges

* Butt Welded Ends to ASME B16.25

* RTJ bonnet gasket ring joint type

* Bolted bonnet with spiral wound gasket, threaded and seal welded bonnet or threaded and pressure

seal bonnet

Standard Material Specification

NO.	Part Name	CS to ASTM	AS to ASTM	SS to ASTM
NO.	Part Name	Type A105	Type F22	Type F304(L)	Type F316(L)
1	Body	A105	A182 F22	A182 F304(L)	A182 F316(L)
2	Stem Ring	A276 420	A276 304	A276 304(L)	A276 316(L)
3	Wedge	A276 410 & 430	A182 F304	A182 F304(L)	A182 F316(L)
4	Stem	A182 F6	A182 F304	A182 F304(L)	A182 F316(L)
5	Gasket	Corrugated SS+ graphite		SS+PTFE
6	Bonnet	A105	A182 F22	A182 F304(L)	A182 F316(l)
7	Bonnet Bolt	A193 B7	A193 B16	A193 B8	A193 B8M
8	Pin	A276 420		A276 304
9	Gland	A276 410		A182 F304(L)	A182 F316(L)
10	Gland Eyebolt	A193 B7	A193 B16	A193 B8	A193 B8M
11	Gland Flange	A105	A182 F11	A182 F304(L)	A182 F316(L)
12	Gland Nut	A194 2H	A194 4	A194 8	A194 8M
13	Yoke Nut	A276 410
14	H.W.Lock Nut	A194 2H	A194 4	A194 8	A194 8M
15	Nameplate	SS
16	Hand wheel	A197
17	Lubricated Gasket	A473 431
18	Stem Packing	Flexible Graphite		PTFE
Suitable Medium		Water, oil, gas etc.,		Water, oil, gas etc.,	HNO3,CH3OOH etc
Suitable Temperature		-29℃～425℃		-29℃～550℃	-29℃～180℃

Dimension (mm) and Weight (Kg)

NPS			1/2"	3/4"	1"	11/4"	11/2"	2"
L(RF) L1(BW)	150Lb		108	117	127	140	165	203
	300Lb		140	152	165	178	190	216
	600Lb		165	190	216	229	241	292
H	150Lb～300Lb		158	169	197	236	246	283
H	600Lb		169	197	236	246	283	320
W			100	100	125	160	160	180
Weight	150Lb	RF	4.5	5.2	8.2	11.5	12.5	20.3
	150Lb	BW	2.8	3.3	5.4	7.1	8.2	12.5
	300Lb	RF	4.8	6.2	9.3	14	15.5	23.4
	300Lb	BW	3.5	4.4	6.8	8.1	9.2	15.4
	600Lb	RF	5.9	7.4	10.4	16.2	17.5	28.3
	600Lb	BW	4.5	5.1	8.2	10.5	12.4	20.1

Flanged End Gate Valve 900Lb～1500Lb

NPS		1/2"	3/4"	1"	11/2"	11/4"	2"
L(RTJ)	900Lb～1500Lb	216	229	254	279	305	371
L1(BW)	900Lb～1500Lb	216	229	254	279	305	368
H(OPEN)		197	197	236	246	283	330
W		125	125	160	160	180	200
Weight	RTJ	7.2	11.5	15.6	16.2	22.6	32.8
Weight	BW	5.2	9.3	12.4	13.8	18.9	27.5

Flanged End Pressure-seal Gate Valve 900Lb～2500Lb

NPS		1/2"	3/4"	1"	11/4"	11/2"	2"
L(RTJ)	900Lb～1500Lb	216	229	254	279	305	368
L(RTJ)	2500Lb	264	273	308	349	384	451
H(OPEN)	900Lb～1500Lb	216	250	270	320	250	445
H(OPEN)	2500Lb	321	321	321	373	406	495
W		160	160	180	200	250	280
Weight	900Lb～1500Lb	19.6	21.5	25.7	37.8	48.5	99.8
Weight	2500Lb	21.5	24.7	30.4	48.1	58.1	130.0

Flanged Forged Cast Steel Gate Valve High Temperature , Threaded Gate Valve

Hot Products

Asme B16.34 Cf8m Body API600 Gate Valve Flanged With Ring Type Joint , Butt Weld

API600 gate valve ASME B16.34 CF8M BODY Flanged, Ring Type Joint, Butt Weld Diseño ASME B16.34, API ...

Din 3202 Din 3230 Api600 24 Inch Gate Valve En-558-1 15 Series Iso 5208 Bw Rf Ends

API600 gate valve EN-558-1 15 series and DIN 3202 DIN 3230 and ISO 5208 Design standard: DIN 3352 ...

RF Flange API 600 Gate Valve Duplex Bolted Bonnet , CN7M INCONEL 625

API600 GATE VALVE Carbon Steel, Alloy Steel, Stainless Steel, Duplex Bolted Bonnet GATE GLOBE CHECK ...

Compact Structure API 600 Gate Valve Smooth Passageways Low Flow Less Resistance

Gate Valves Compact Structure Smooth Passageways Low-Flow Less Resistance Less Resistance ss/cs ...

900lb-2500lb API 600 Gate Valve Pressure Bonnet Sealing , Gear Operate CA15

API600 GATE VALVE pressure bonnet sealing 900lb~2500lb gear operate CA15 Characteristics and details ...

Bolted Bonnet Knife Gate Valve 16 Inch C12A Material API 600 ASME B16.34

Design and manufacture: JB/T8691-1998 Structural length: GB/T15188.2-94 Flange connection: GB/T9113...

Related Products