Active Member
|
[China]
Address: Wuxi, China
Contact name:Lisa Hao
Sino Linear Motion Solution Provider |
|
|
36Volt Brush DC Motor Miniature Linear Actuators With Limit switches, optional Potentiometer, 20cm travel, 220lbs force
Specification of Mini Linear Actuator:
| Item name | Mini Linear Actuator |
| Max. stroke | 600MM |
| Max. Static load | 2000N |
| Max. Dynamic load | 1200N |
| Operation Speed | 5mm/s/1200n 7mm/s/1000n |
| Input Signal | 3.3VDC, 5VDC |
| Position Detection | Potentiometer |
| Motor | Brushed DC motor |
| Degree of Protection | IP65 |
| Screw Type | Trapezoidal screw |
| Power Input | 48V/36V/24V/12V |
| Self-locking ability | YES |
| Operating temperature | -35℃~65℃ |
| Optional 1 | Installation size |
Miniature Linear Actuators Electric 36 Volt Linear Actuator With Limit Switch
| IP Rating Reference Chart Below is an easy to follow reference chart to know IP rating you use now | ||
| IP Number | First Digit - SOLIDS | Second Digit - LIQUIDS |
| IP43 | Protected from tools and small wires greater than 1 millimeter. | Protected from water spray less than 60 degrees from vertical. |
| IP54 | Protected from limited dust ingress. | Protected from water spray from any direction. |
| IP65 | Protected from total dust ingress. | Protected from low pressure water jets from any direction. |
| IP66 | Protected from total dust ingress. | Protected from high pressure water jets from any direction. |
Load & Speed of Linear Actuator:
| Linear Actuator | Load±10％(N) | Speed±2(mm/S) | |||||||
| Load | 1,200 | 1,000 | 800 | 700 | 600 | 500 | 400 | 200 | 100 |
| Speed | 5 | 7 | 8 | 11 | 10 | 16 | 17 | 40 | 60 |
Miniature Linear Actuators Electric 36 Volt Linear Actuator With Limit Switch
Linear Actuator Without Potentiometer
For stroke length below 12’’ (300mm)
A = Stroke Length +4.2’’(105mm)
B = Stroke Length X2 + 4.2’’(105mm)
For stroke length between 12’’-20’’ (300-500mm)
A = Stroke Length +4.8’’(120mm)
B = Stroke Length X 2 +4.8’’(120mm)
For stroke length between 20’’-24’’ (500-600mm)
A = Stroke Length +5.2’’(130mm)
B = Stroke Length X 2 +5.2’’(130mm)
Linear Actuator With Potentiometer
For stroke length below 12’’ (300mm)
A = Stroke Length +5.4’’(135mm)
B = Stroke Length X2 + 5.4’’(135mm)
For stroke length between 12’’-20’’ (300-500mm)
A = Stroke Length +6’’(150mm)
B = Stroke Length X 2 +6’’(150mm)
For stroke length between 20’’-24’’ (500-600mm)
A = Stroke Length +6.4’’(160mm)
B = Stroke Length X 2 +6.4’’(160mm)
Below you can see the correlation between STROKE and LOAD of Mini LINEAR ACTUATOR.
Stroke Range (mm) | Max Load (Newton) |
| 501-600 | 100 |
| 401-500 | 200 |
| 301-400 | 400 |
| 201-300 | 1000 |
| 30-200 | 1200 |
Picture of Electric Linear Actuator Mini
Lead time of Linear Actuator:
| Quantity(Piece) | 1-10 | 200 | 500 | >1000 |
| Est. Time(days) | 7 | 15-18 | 22 | To be negotiated |
Some examples of applications where LINEAR ACTUATOR / ELECTRIC CYLINDER are in use:
We are a professor company on linear actuators; we have different linear actuators with different specifications:
Let's Connect
Have questions about our products, job opportunities or company?
Answers are always just an email or phone call away.
