Active Member
|
[China]
Address: 4/F, Bldg.B, Hangcheng Industrial Zone, Hedong, Xixiang Town, Bao'an Dist., Shenzhen, China
Contact name:Jack
Shenzhen Trendz Technology Co., Ltd |
|
|
hot sale electric handy facial nano mist spray red color ABS materil USB rechargeable facial steamer
Moisturizer handy face nano mist maker water mist system rechargeable Top sale japan nano facial handy nano
1. Nano penetration skin care theory, adopts high- tech nano
atomization chip and special high-speed oscillation process, turn
into the tiny particle and penetrate deep into skin quickly.
2. Nano water molecules lock skin moisture by fusing together with
sebum, which makes skin fresh, hydrated and elastic.
3. Using mineral water can deliver nano water molecules to cuticle,
refines the look of skin with unique light-scattering optics, and
keep long-lasting hydration.
4. Using oil free toner(please dilute with water-add 5 times
mineral water) can improve skin moisturizing effectively, best
penetration.
5. Using on dry hair can smooth the coarse, moisturize hair,
prevent electrostatic generation more.
6. Have time memory function, the device will be turned off after
50seconds automatically, easy to master the using time.
7. Embedded tank, capacity up to 9ml, can use around 13times.
8. USB charging, use conveniently, more energy-saving and
environmental protection.
CHARGING TIPS
1. For better experience, please charging when you use this product
for the first time.
2. This product is charging by USB charger cable, 2 hours for 100%
fully charging.
3. When you push down the slide, the blue light indicator will be
on and nano mist will spray out.
4. When the indicator light will flash blinking blue, it means it
is in low battery power. Please charge the product in time.
5. When the product does not work, check if there is water in the
tank and power left. If the product is still not working, check the
Troubleshooting for more details.
6. The led light will be red during charging until charging 100%
full.
7. 1hours working hour for 100% full power, 50 seconds spray each
time for totally 72 times.
8. please keep water tank empty and clean if not using and store it
in a dry and clean place.
Product Parameters
| Product Name | Nano mist spray |
| Model No | ZL-S6669 |
| Power Supply | DC6V(4x 1.5V AAA) |
| Working Power | 2.2W |
| Water Capacity | 5ml |
| Mist Particle | 7um |
| Atomizing quantity | about 1.2ml/min |
| Spray duration | 4mins |
TROUBLE SHOOTING
Q: What should be paid attention to in the process of using the
spray?
A: When using the sprayer, the distance from the face is around
15cm. The water tank is recommended to add mineral rich natural
mineral water, such as the white boiling water or pure water after
ion treatment, there may be some fog or small drops of water on the
nozzle, which is caused by pure water is not conductive, for
containing mineral water can be restored to normal.
Q: why have the water drops on the nozzle?
A: From the ingredients of water, pure water has filtered
impurities; And mineral water contain potassium ions, calcium and
other minerals. The pure water and distilled water is too light,
will lead to the formation of water drops on the nozzle. It is not
recommended to add pure water and distilled water (Yi Bao, Wa ha
ha, Evian bottled water and ice dew, etc).
Q: No spray mist under the water tank has water and full charge?
A: Due to air pressure, nozzle happens water seepage may cause no
spraying. If there is water leakage or not spray, gently dry with
paper towels and water spray or shake the body until the spray from
the proposal. Do not use toothpicks or other sharp objects touch,
so as not to damage the instrument.
Q: Why need to shake for spraying out mist?
A: This is a normal phenomenon. Sometimes the impurity or the air
bubble can block the atomization sheet, and then shake and stand
for a few minutes for normal working.
Q: Can add heat water into the spray?
A: Cold spray can only add room temperature mineral water, heating
water will damage the body, it is not recommended.
Q: How to do after putting into other liquid?
A: Open the soft plug to empty the liquid, remove the transparent
water tank, rinse with water the clogging impurities, then wash
with alcohol cotton swab nozzle, put mineral water to clear.
OEM & ODM orders are welcome
1.Free to printing one color silkscreen logo is free if order's q'ty exceed 3000pcs;
2.If order's q'ty exceed 5000pcs, change box design is free
