Touch Screen N95 Mask Production Line Surgical Medical Grade Automatic

3 Ply KN95 N95 Face Mask Making Machine Face Mask Production Line

The mask machine is to make various masks with certain filtering performance through processes such as hot pressing, folding molding, ultrasonic welding, scrap removal, welding of ear bands and nose bridge strips, etc. The mask equipment is not a single machine, it requires The cooperation of multiple machines completes various processes.

1. Function introduction

This equipment is used for automatic folding mask production line (typical models such as N95 masks) .The equipment is loaded on the whole roll.Multi-layer non-woven fabric rolls are subjected to compound roll welding.The nose line is unwound and cut after welding. Unwinding, welding after fixed-length cutting, and then the body is folded in half, after ultrasonic welding and fusion, the final mask is rolled and formed.

The mask has comfortable wearing, no pressure, good filtering effect, fits the shape of human face, and can be applied to medical, electronics, mining, construction and other industries.

This machine adopts PLC, touch screen control, the main conveyor belt adopts single-phase motor conveying, stepping motor reversal, precise transmission, stable control and adjustable speed.

2. Product Features

1. Aluminium alloy structure is adopted, which is beautiful and firm without rust.

2. Computer PLC (Mitsubishi PLC) programming control, high stability, low failure rate and low noise.

3. Servo motor imported from Taiwan, stepper motor drive, high precision.

4. Photoelectric detection of raw materials to avoid mistakes and reduce waste.

5. The machine adopts pulleys and fixed feet, which is convenient and fast to move, strong fixation, and does not shake.

3. Technical parameters

1. The size of the machine is long, wide and high: the size of the whole machine is one according to the actual 1050cm * 150cm * 180cm

2. Voltage: AC220V 50-60HZ

3. Production efficiency: 30-40 pieces / min

4. Power: 10KW

4, technical parameters:

Imput raw materials, automatic feeding, nose line cutting / feeding, hemming welding, folding scene, forming welding, photoelectric detection, automatic slicing, finished product output, receiving tray sorting, full automation

5, equipment use matters needing attention:

The machine should be installed on a flat and solid ground, and sufficient operation and maintenance space should be reserved around the machine

5.1 Environmental conditions

1. Temperature: The normal ambient temperature must be 5°C ~ 40°C.

2. Humidity: 30% ~ 90%.

3. Keep away from paint (gasoline), chemicals, acid, alkaline and explosive or flammable materials.

4. Avoid neighbouring machines that can cause vibration. Ambient lighting: above 300LUX

5.2 Installation notes

1. After the machine is positioned, adjust the foot cup of the machine and use the horizontal auxiliary tool until it is adjusted to the level.

2. Connect the power cord. This machine uses 220V single-phase, 50HZ power. It is strictly prohibited to connect 380V or other power sources that do not meet the requirements. Please pay special attention to the user! To ensure safety, the connection work must be completed by an electric professional, and a connection cable is provided. If self-equipped power plug is used, 2.5mm2 three-core cable must be used to correctly connect live wire (L), neutral wire (N) and ground wire (E).

Our Service

Pre-sale Service

-- 12-hour sales on line consulting stand by

-- Customized and feasible solution design

-- Well-train sales answer you in fluent English

In-sale Service

-- Production line planning

-- Assured and high-efficient delivery time

--Inspection video and reports

After-sale Service

-- Engineers are available overseas for installation & testing

-- Emergency Call-out for 12-hour every day

-- Technical Manual, Troubleshooting

-- Installation Video

-- On-going Technical Support

-- Lifetime maintenance