Active Member
|
[China]
Address: No.377 Changbang Road, Wujiang Economic and Technological Development Zone
Contact name:Chuanchuan Li
jiangsu jzer Automation Technology Co.,Ltd. |
|
|
20KW N95 Medical Mask Making Machine 20Pcs/Min
Ultrasonic Welding Medical Automatic N95 Cup Mask Making Machine
1 . Descriptions:
2 . Specifications:
| Item Name | Automatic Face Mask Making Machine |
| Capacity | 10-20 PCS/min (according to the actual debugging effect) |
| unique technology | The original cold-pressed melt-blown molding technology |
| CONTROL PANEL | Man-machine Interface (touch Screen) / |
| Rate of qualified products | 95% (except for original material and human operation) |
| Main accessories | Cylinder: AirTAC Screw guide: HIWIN/TBI PLC: Mitsubishi or Xinje Use environment General workshop environment is acceptable (nocorrosive odor, no dust) |
| Power supply | 220VAC±5% 50HZ grounding protection rated power ≤10KW (including welding machine) |
| Temperature | -20°C~50°C |
| Meterial | Rack whole steel structure,aluminum alloy |
Final products
Advantage:
European standards committee issued the certification standard of
respiratory protective gear. The standard is that the granular
material is divided into solid particle protection and liquid
particle protection, respectively with NaCl (sodium chloride) and
DOP (paraffin oil) aerosol test and classification.
According to the tested particle penetration rate, qualified solid particle protection filter material is divided into three levels: P1FP1, P2 (FP2) and P3 (FP3), among which P3 has the best protection performance, while P1 has the lowest protection performance.
Liquid particle protection filter material is divided into two
levels, P2 and P3, the protection performance of P3 is higher than
that of P2. According to the EN149 standard certified by C, masks
are defined as three types according to the filtering effect: FP1
filters at least 80% of the particles; FP2 filters at least 94% of
the particles; FP3 filters at least 99% of the particles.
European standard EN 149:2001 +A12009 for dust mask
Penetrationra
| Sodium chloride particles 95L/min maximum % | Oil particles 95L/min maximum % | ||
| Penetration rate | Efficiency | Penetration rate | Efficiency | |
| FFP1 | 20 | ≥80% | 20 | ≥80% |
| FFP2 | 6 | ≥94% | 6 | ≥94% |
| FFP3 | 1 | ≥99% | 1 | ≥99% |
Respiratory resistance
| Grade separation | Maximum resistance within allowable range | ||
| To breathe in | Breathe out | ||
| 30L/min | 95L/min | 160L/min | |
| FFP1 | 0.6 | 2.1 | 3.0 |
| FFP2 | 0.7 | 2.4 | 3.0 |
| FFP3 | 1.0 | 3.0 | 3.0 |
Features
1. The advantage of the original cold press melt blow molding
technology is that the low temperature does not change the chemical
composition and physical structure of the material, so our machine
can use ffp3 material to make ffp3 masks
2. The volume of N95 Automatic Cup Mask Making Machine is small,
accounting for only 55%, which greatly reduces the space and saves
costs
And there is no need to disassemble during air and sea
transportation, saving 50% of freight
3. The efficiency of the N95 automatic cup-shaped mask machine of the
peer product is only less than 10 pieces per minute, while the
production efficiency of our cup-shaped mask machine can reach
10-20 pieces per minute, and the production efficiency has
increased by 100%. This cup-shaped mask machine is three types
compared to other mask machines
4. The module of the whole machine is relatively simple, the operation is relatively smooth, the body is stable and error-free, and the operation is fool-like. After landing, it can be directly connected to produce without installation and debugging.
5. Our cup-shaped mask machine has a two-year long warranty period, which is worry-free after sales.
The fully automatic inner ear mask machine uses ultrasonic welding
This Cup Mask Making Machine is composed of hot pressing forming, ultrasonic welding, paste sponge strip, cutting, paste nose bridge strip, pad printing, welding lug and other parts.Each module can be used independently and combined freely.The equipment is easy to maintain, modular, and can be quickly stitched together for production.
Equipment melt-blown cloth, non-woven cloth separately formed, can be cold pressing or hot pressing, maintain the integrity of melt-blown cloth, quality can reach FFP3 grade.
