Active Member
|
[China]
Address: No.377 Changbang Road, Wujiang Economic and Technological Development Zone
Contact name:Chuanchuan Li
jiangsu jzer Automation Technology Co.,Ltd. |
|
|
Semi Automated N95 Face Mask Making Machine With Man - Machine Combination
Semi automatic KN95 mask machine,from the cloth into the finished products to complete automation, automatic add nose bridge strip, ear band welding, folding, molding fusion and finished products cut off, waste elimination, finished products output fully realized automatic production on a machine, the whole machine only needs one person to operate.
Working Process
Cloth material roll feeding- rollers transmission--- multilayers cloth folding-fixed length cutting of nose bridge pressing strip-ultrasonic pressing----cutting waste material (optional)----ear loop pressing and mask forming- folding-ultrasonic folding----removing waste material (optional)---cutting-finished masks.
Semi-automatic film machine
The equipment solves the defects of the current fully automatic line, which is difficult to operate and has a high defect rate. The equipment only needs 1 person, using the touch screen method, manual and automatic switching. Automatically built nose bridge, knurling, rolling cutting are achieved
| No. | Name | Parameter |
| 1 | Type | 2AT.JZKZHRDBZD-A |
| 2 | Size | 370 (length) * 80 (width) * 150 (height) |
| 3 | Weight | Total equipment weight ≤ 200KG Ground load 200KG / ㎡ |
| 4 | Working power supply | 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including welding machine) |
| 5 | Compressed air | 0.4-0.6MP (clean water after dehydration, no oil, filtration, pressure stabilization), use flow rate is about 300L / min) |
| 6 | Production efficiency | 20-40PCS/min |
| 7 | product qualification rate | 99% (except for the original material and human operation) |
| 8 | Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie |
| 9 | Operating environment | General workshop environment is acceptable (no corrosive odor, no dust) |
Semi-automatic earloop welding machine
This equipment solves the defects of the current fully automatic line, difficult operation, high defect rate, etc., only one person is required in the equipment, using automatic induction and manual button type, the equipment automatically cuts the ear strap line, automatic alignment, automatic welding, and quickly reaches product quality demand.
Semi-automatic V-shaped edge banding machine
This equipment solves the defects of the current fully automatic line, difficult to operate, high defect rate, etc., only one person is required to use the equipment, the foot switch type is adopted, the equipment automatically depresses the ultrasonic wave, the manual alignment is accurate, convenient, automatic welding, quickly meet the product quality requirements .
Semi-automatic earloop welding machine Semi-automatic V-shaped edge banding machine
Our Service
Pre-sale Service
-- 12-hour sales on line consulting stand by
-- Customized and feasible solution design
-- Well-train sales answer you in fluent English
In-sale Service
-- Production line planning
-- Assured and high-efficient delivery time
--Inspection video and reports
After-sale Service
-- Engineers are available overseas for installation & testing
-- Emergency Call-out for 12-hour every day
-- Technical Manual, Troubleshooting
-- Installation Video
-- On-going Technical Support
-- Lifetime maintenance
