Active Member
|
[China]
Address: No.377 Changbang Road, Wujiang Economic and Technological Development Zone
Contact name:Chuanchuan Li
jiangsu jzer Automation Technology Co.,Ltd. |
|
|
Medical Face Mask Machine With Semi Automatic V - Shaped Edge Banding Machine
This KN95 face mask machine is a semi-automatic KN95 face mask production line. The production line consists of a material rack, a mask film machine, an earloop welding machine and a edge banding machine.
The high-speed slice machine adopts ultrasonic welding technology to automatically produce 2-5 layers of butterfly mask body (such as 3M company's 9001, 9002 series masks). Automatically complete the operation, manual feeding and automatic feeding; the included processes include coil feeding, nose beam feeding, mask pattern welding, mask cutting, and main body cutting.
The equipment produces the main body of the butterfly mask through the cooperation of the feeding system, the fabric forming system, and the nose beam forming and cutting system. In order to meet the market demand, the mold can be simply replaced to adapt to the production of various types of butterfly mask bodies .
Semi-automatic film machine
TIt is also known as a mask tablet machine. It is a machine used to automatically produce multi-layer material flat masks. It can use 1 ~ 4 layers of KN95 PP spunbond non-woven fabric, activated carbon and filter materials. The entire machine from raw materials to the nose line Inserting, edge banding and cutting finished products are all in one line. The film machine adopts aluminum alloy frame, light and firm, and adopts PLC control system. When the material is running, the sensor and ultrasonic welding are used, the output is high, and the product qualification rate is high.
Product Features
1. Adopt open design, good window.
2. Man-machine combination, debugging and easy maintenance.
3. Easy to operate, low cost, strong and durable.
| No. | Name | Parameter |
| 1 | Type | 2AT.JZKZHRDBZD-A |
| 2 | Size | 370 (length) * 80 (width) * 150 (height) |
| 3 | Weight | Total equipment weight ≤ 200KG Ground load 200KG / ㎡ |
| 4 | Working power supply | 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including welding machine) |
| 5 | Compressed air | 0.4-0.6MP (clean water after dehydration, no oil, filtration, pressure stabilization), use flow rate is about 300L / min) |
| 6 | Production efficiency | 20-40PCS/min |
| 7 | product qualification rate | 99% (except for the original material and human operation) |
| 8 | Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie |
| 9 | Operating environment | General workshop environment is acceptable (no corrosive odor, no dust) |
Semi-automatic earloop welding machine
This equipment solves the defects of the current fully automatic line, difficult operation, high defect rate, etc., only one person is required in the equipment, using automatic induction and manual button type, the equipment automatically cuts the ear strap line, automatic alignment, automatic welding, and quickly reaches product quality demand.
Features
1. Use open + closed design, good window. High safety, reduce work injury
2. Man-machine combination, debugging and easy maintenance.
3. Easy to operate, low cost, strong and durable.
Semi-automatic V-shaped edge banding machine
This equipment solves the defects of the current fully automatic line, difficult to operate, high defect rate, etc., only one person is required to use the equipment, the foot switch type is adopted, the equipment automatically depresses the ultrasonic wave, the manual alignment is accurate, convenient, automatic welding, quickly meet the product quality requirements .
Features
1. Adopt open design, good window.
2. Man-machine combination, debugging and easy maintenance.
3. Easy to operate, low cost, strong and durable.
Semi-automatic earloop welding machine Semi-automatic V-shaped edge banding machine
Our Service
Pre-sale Service
-- 12-hour sales on line consulting stand by
-- Customized and feasible solution design
-- Well-train sales answer you in fluent English
In-sale Service
-- Production line planning
-- Assured and high-efficient delivery time
--Inspection video and reports
After-sale Service
-- Engineers are available overseas for installation & testing
-- Emergency Call-out for 12-hour every day
-- Technical Manual, Troubleshooting
-- Installation Video
-- On-going Technical Support
-- Lifetime maintenance
