High efficiency 40-50pcs/min full automatic ffp2 kn95 auto mask making machine,kn95 mask machine

High efficiency 40-50pcs/min full automatic ffp2 kn95 auto mask making machine,kn95 mask machine

Function introduction

This equipment is used for fully automatic cup-shaped mask production line (typical model such as KN95 mask), the equipment is full roll feeding, multi-layer spunlace cloth, melt spray cloth, non woven fabric roll is formed by hot pressing, overlapping and cold pressing, ultrasonic welding and fusion, and the final mask is cut into shape, automatically sticking foam, and automatically hot pressing the nose strip. Finished products are welded by automatic ear straps.The mask is comfortable to wear, no pressure, and the mask has a good filtering effect, which fits the shape of the human face. It can be applied to medical, electronics, and mining,construction and other industries.

This machine adopts PLC, touch screen control, and the main conveyor belt adopts imported servo motor for conveying. It has precise transmission, stable control and adjustable speed.

Product features

1. It is welded with cast iron and painted, which is beautiful and firm without rusting.

2. Computer PLC (Mitsubishi PLC) programming control, high stability, low failure rate and low noise.

3. It adopts imported servo motor and imported pneumatic components with high precision.

4. Photoelectric detection of raw materials to avoid errors and reduce waste.

5. The machine adopts pulleys and fixed feet, which is convenient and quick to move, strong in fixity, and does not move.

Technical Parameters

1. Machine size: length, width and height: the whole machine is one for one size, whichever is actual 8700(L)x1600(W)x2200(H)mm

2. Voltage: AC220V 50-60HZ

3. Production efficiency: 40-50 pieces/min

4. Power: 10KW

Import raw materials, automatic feeding, hot pressing, overlapping cold pressing, ultrasonic welding fusion, cutting and forming, automatic foaming, automatic hot pressing nose bridge, automatic ear band welding, automatic assembly of breathing valve (optional) to produce finished products, and the whole process is automated.

Equipment Use Precautions:

The machine should be installed on a flat and firm ground, and sufficient space for operation and maintenance should be reserved around the machine.

5.1 Environmental Conditions

1. Temperature: The normal ambient temperature must be 5°C~40°Co

2. Humidity: 30% to 90%.

3. Keep away from paint (gasoline), chemicals, acid, alkali, explosives or combustibles.

4. Avoid neighboring machines that can produce vibrations. Environment lighting: above 300LUX

5.2 Installation considerations

1. After the machine is positioned, adjust the foot cup of the machine and use a leveling aid until it is level.

2. Connect the power cord. This machine uses 220V single-phase, 50HZ power, it is strictly prohibited to connect 380V or other

Serial number name parameter 1 size 8700(L)x1600(W)x2200(H)mm

2 Weight The total weight of the equipment is less than or equal to 5000KG The ground load is 350KG/㎡

3 colors, sheet metal warm gray 1C, aluminum profile primary color

4 Working power supply 220VAC±5% 50HZ grounding protection Rated power ≤10KW (including welding machine)

5 Compressed air 0.6~0.8MP (clean air after water removal, oil-free, filtration, and pressure stabilization) The use flow is about 300L/min)

6 Production efficiency 40-50PCS/min (according to the actual debugging effect)

7 Product qualification rate 95% (except for original materials and manual operation)

8 Main accessories Cylinder: AirTAC Screw guide: HIWIN/TBI PLC: Mitsubishi or Xinje

9 Use environment The general workshop environment is acceptable (no corrosive odor, no dust)

Please pay special attention to the power supply that meets the requirements! To ensure safety, the connection work must be done by an electrical professional person.

A connecting line is randomly provided. If you are equipped with a power plug, you must use a 2.5mm2 three-core cable.Make sure to connect the live wire (L), neutral wire (N) and ground wire (E).