Active Member
|
[China]
Address: No.377 Changbang Road, Wujiang Economic and Technological Development Zone
Contact name:Chuanchuan Li
jiangsu jzer Automation Technology Co.,Ltd. |
|
|
Breathing Protection Face Mask Production Line , Mask Manufacturing Machine
1. Function introduction
This equipment is used for automatic folding mask production line (typical models such as N95 masks) .The equipment is loaded on the whole roll.Multi-layer non-woven fabric rolls are subjected to compound roll welding.The nose line is unwound and cut after welding. Unwinding, welding after fixed-length cutting, and then the body is folded in half, after ultrasonic welding and fusion, the final mask is rolled and formed.
The mask has comfortable wearing, no pressure, good filtering effect, fits the shape of human face, and can be applied to medical, electronics, mining, construction and other industries.
This machine adopts PLC, touch screen control, the main conveyor belt adopts single-phase motor conveying, stepping motor reversal, precise transmission, stable control and adjustable speed.
2. Product Features
1. Aluminium alloy structure is adopted, which is beautiful and firm without rust.
2. Computer PLC (Mitsubishi PLC) programming control, high stability, low failure rate and low noise.
3. Servo motor imported from Taiwan, stepper motor drive, high precision.
4. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
5. The machine adopts pulleys and fixed feet, which is convenient and fast to move, strong fixation, and does not shake.
3. Technical parameters
1. The size of the machine is long, wide and high: the size of the whole machine is one according to the actual 1050cm * 150cm * 180cm
2. Voltage: AC220V 50-60HZ
3. Production efficiency: 30-40 pieces / min
4. Power: 10KW
4, technical parameters:
Imput raw materials, automatic feeding, nose line cutting / feeding, hemming welding, folding scene, forming welding, photoelectric detection, automatic slicing, finished product output, receiving tray sorting, full automation
| No. | Item | Parameter |
| 1 | size | 1050 (length) * 150 (width) * 180 (height) |
| 2 | Weight | weight ≤1500KG Ground load 350KG / ㎡ |
| 3 | Color | Color Sheet metal warm gray 1C, primary color of aluminum profile |
| 4 | Working power supply | 220VAC ± 5% 50HZ grounding protection rated power ≤10KW (including welding machine) |
| 5 | Compressed air | 0.4-0.6MP (clean water after dewatering, no oil, filtration, pressure stabilization), use flow rate is about 300L / min |
| 6 | Production efficiency | 30-40PCS / min (according to the actual debugging effect) |
| 7 | Product qualification rate | 99% (except for the original material and human operation) |
| 8 | Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie |
| 9 | Operating environment | General workshop environment is acceptable (no corrosive odor, no dust) |
5, equipment use matters needing attention:
The machine should be installed on a flat and solid ground, and sufficient operation and maintenance space should be reserved around the machine
5.1 Environmental conditions
1. Temperature: The normal ambient temperature must be 5°C ~ 40°C.
2. Humidity: 30% ~ 90%.
3. Keep away from paint (gasoline), chemicals, acid, alkaline and explosive or flammable materials.
4. Avoid neighbouring machines that can cause vibration. Ambient lighting: above 300LUX
5.2 Installation notes
1. After the machine is positioned, adjust the foot cup of the machine and use the horizontal auxiliary tool until it is adjusted to the level.
2. Connect the power cord. This machine uses 220V single-phase, 50HZ power. It is strictly prohibited to connect 380V or other power sources that do not meet the requirements. Please pay special attention to the user! To ensure safety, the connection work must be completed by an electric professional, and a connection cable is provided. If self-equipped power plug is used, 2.5mm2 three-core cable must be used to correctly connect live wire (L), neutral wire (N) and ground wire (E).
