AC220V 50-60HZ Automatic Facial Mask Machine , Face Mask Production Line

AC220V 50-60HZ Automatic Facial Mask Machine , Face Mask Production Line

This production line is a fully automatic one-to-two face mask machine, one body machine drives two ear band machines. After the main body machine outputs the mask body, the mask body sheet is conveyed to the turning mechanism by a conveyor belt structure. The reversing mechanism is used to flip the mask plate onto the belt connected to the ear band machine, and then the mask sheet is conveyed to the first mask plate on the front of the ear band machine through the conveyor belt, and finally the mask sheet is placed on the ear band by the cylinder pressing In the mask plate of the machine, the ear band machine is used to complete the welding of the ear bands of the mask and the edging, thereby completing the production of an ear band mask product.

Product Features

1. Cutting roller

We use the chrome steel to cover the rubber roller both sides .So that the rubber is not crack from side after extended periods use.

2. Traction roller

We use the silicone rubber materials instead of the butyronitrile materials .The silicone rubber materials is good abrasion

resistance and will not crack

3. PLC touch screen

We use DELTA group brand PLC touch screen .

4. Mask nose strip tension controller

We use Mask nose strip tension controller .This device can avoid the nose strip differ in length .

5. Nose strip straight- feeding device

We use Nose strip straight- feeding device , It can ensure the nose strip be feeded straightly in the processing, so the finished

mask will be flat and artistic.

7. Non woven raw materials sensors

We use Non woven raw materials sensors,once the raw materials use up,machine will stop automatically

8. Raw materials tension controller 1

We use the Raw materials tension controller to avoid the materials plugging .

9. Raw materials tension controller 2

Our machine is equipped with two braking ways . One is belts pressing and another is screw fixing . You could choose either one or use both according to your need.

10. Raw materials EPC device

We use raw materials EPC device ,to do materials adjustment.

11. Machine door lock

We just door lock ,with out the key,worker can not start the machine.

12. Frequency converter

We use DELTA group brand frequency converter .

13. Machine body and materials feeding connect board,We connect Machine body and material feeding frame with connecting boards,so that the running of whole machine will be very

stable.

14. Electrostatic eliminator

In our machine we have one electrostatic eliminator . to eliminate non woven mask surface static.

15. Machine motor

Our geared motor is new type and no need refuel.

16.Fan

We install the fan near the ultrasonic horn ,to Lower the horn temperatures,to to extend ultrasonic life

Features

• Computer PLC programming control, servo drive, high degree of automation.
• Photoelectric detection of raw materials to avoid mistakes and reduce waste.
• The automatic mask making machine is automatic from material feeding to mask collection.
• High automation in ear-loop welding, edge wrapping, counting, and material discharging.
• The ultrasonic technique does no harm to the characteristic of the material. Easy and safe operation.
• Artistic and durable, aluminum alloy board, lean and practicality.
• Faster, Rotary connection device of Independent innovation design.

Technical Parameter

1. The length, width and height of the machine: the size of the whole machine is subject to the actual 6500MM * 3500MM * 1600MM

2. Voltage: AC220V 50-60HZ

3. One-to-two production efficiency: more than 100 pieces / min

4. Power: 3.5KW

Technical Parameters

Import raw materials, automatic feeding, nose line cutting / feeding, hemming welding, folding scene, forming welding, photoelectric detection, automatic slicing, finished product output, receiving tray sorting, full automation