High Speed Disposable Paper Cup Manufacturing Machine 380V 3 Phase

machines to produce paper cups cup paper printer machine paper cup machinery

Machine model: high-speed simple paper cup machine
Backside Soldering : Copper Heater Ultrasonic Heater

Raw material : single side PE coated paper (popular hot drink cup) single/double PE coated paper (popular hot drink cup and cold drink cup)
Total weight : Gw /NW:1750 kgs/1650 KgS.
Working air source (ultrasonic): Air pressure 0.4MPa a. machine.
Cup bottom heating: heater knurling (single-sided PE paper is heated and knurled; double-sided PE paper is knurled with cooling device circular water.)
Bottom knurling: heat knurling (if using single layer PE coated paper)

Electric System:

High-quality brand electrical systems, such as Delta, Schneider.
The PLC control system adopts the Delta brand, which is made in Taiwan and is reliable.
quality.

Servo Motor:

The bttom paper feeding is controlled by servo motor and stepping motor,which greatly improve paper feeding in high precision and
high efiency way.(more stable ,less troubles and save bottom paper)

Excerpted from the Internet, for reference only

01
The structure of KN95 automatic mask machine
1.1 Fully automatic KN95
1.2 Introduction of automatic KN95 station
1.2.1 Principle of unwinding station:
1) Collect the actual position of the counterweight on each unwinding station through a potentiometer, control the output of the inverter combined with the coil diameter estimation algorithm and PID operation, and rotate the unwinding motor to adjust the counterweight to stabilize it at the corresponding target position , so as to achieve constant unwinding tension;
2) When the drive motor stops rotating, the feeding will make the fabric tighter and tighter. At this time, the roller on the left side of the rotating rod will be pulled up gradually until the sensor plate is detected by the sensor above, and the fabric roll starts to discharge;