Xi’an MKL technology co., LTD |
MKL - (one body)Pneumatic filling type road marking paint production equipment
PREVIOUS:
NEXT:
Pneumatic type filling reticule coating production equipment by feeding mechanism, the basic configuration of horizontal mixer, pneumatic filling type of packaging, it combines feeding, stirring, pneumatic filling in a suit, a simple and practical production equipment.Its main characteristic is: continuous, high efficiency, multi-energy.
1. Scope of application
The production equipment of the gas-controlled filling line coating is specially designed for the production of marking paint.
2. Main performance
Because the reticule coating is a kind of special touch adhesive, heat resistance, friction immediately solidified powder with a small amount of liquid mixture, which requires the production equipment of mixing structure, the structure of the filling, the liquid feeding structure design must be reasonable, otherwise, will cause material closed, unable to stir, discharging jam, broken shaft, such as burning motor failure.The structure, performance and reliability of the line coating equipment are much higher than that of ordinary powders.
Equipment structure
Configuration classification | Main body | type | Parameter | Function |
Basic configuration | Feeding mechanism | Multi Screwfeeding machine (patent) | Consists of two parts: 1, horizontal pushing mechanism, 1.5KW motor, 219mmspiral tube 2, inclined feeding mechanism, 3KW motor If necessary, you can use 3 or more than 3 screws forquick feeding | 1, the material fast: horizontal, vertical screw extrusionat the same time, feeding faster 2, no dead, no dead ends, the material easy to decline,is not easy to Zhanbi, arch. 3, the hopper can be greater: the hopper can be larger,and is conducive to the use of tons of bags 4, is conducive to large-scale production: the use ofmulti helix at the same time fast feeding, suitable for large-scaleproduction 5, the safety protection function: the upper part ofthe spiral has the human body touches the protection net |
Mixing mechanism | Blade, spiral horizontal mixing | 1, the mixing bin volume 1500L, stirring bin side platethickness is not greater than or equal to 4.5mm, the roof is greater than orequal to 2.5mm 2, stirring motor 15kw, stirring speed: 25 RPM / min | 1, rapid mixing: double reverse three-dimensionalmixing method, so that the material quickly mixed evenly 2, the stirring resistance is small: the specialstructure of the outer mixing blades and special angle, greatly reduce thestirring resistance, avoid mixing start weak or with material restartdifficult |