SH712BSF-SUS304 stainless steel Pedaled emergency shower & eyewash station combination foot operated rotary shower head

SH712BSF-Pedaled shower & eyewash station,SS304,combination foot operated type

Item no.:SH712BSF
Product name:Pedaled shower & eyewash station,SS304
Material:304 stainless steel
Coating:High gloss epoxy powder,red/yellow is available
Sprayer head:ø250mm,has dust shield cap,can be removed when eye wash operated
Valve:eye wash-1/2" & shower-3/4" ball valve;activated in 1 second
Pressure:0.2-0.8Mpa
Foot treadle:SS304,is available
Diameter of Eyewash Basin:260mm
 

More details,pls visit  www.labppe.com

Emergency shower,Eyewash,eye wash,OSHA,ANSI  Z358.1-2004,CE certificate.ISO9001:2008.

1. Using environment

   1. Where splashes dangerous substances, such as chemicals, dangerous goods, hazardous liquid, solid, etc.

   2. The environment with pollution.

2. Where burning may occur.

3. Please take anti-freezing measures for the pipeline in cold areas.

4. Installation conditions

5. The rescue is effective within the radius of 10 or 15 meters, with at least three directions of work position, and with visible sign. And without obstacles in the surroundings for quick use.

6. Installed near the hazardous areas.

7. Within a radius of 1.5 meters of the composition eyewash, there should be no electric switches to avoid electrical short circuit.

8. The water supply of the eyewash should be clean tap water or water filtered with appropriate filter medium.

9. Please follow the product specification for the pipe diameter and connection, to ensure the equipment work correctly.

10. 

Emergency shower &eye wash’s instruction

*Usage

This unit is not only the essential equipment of labor protection, but also the essential facilities against poisonous and corrosive material. If accidents happen, reduce the damage to the minimum degree by quickly spraying or washing the hurt.

*Main function parameters

Choosing these data is considering the hurt to the skin, eye(s), when accidents happen.

*Structure

1. Polishing.

2.SS ball valve and screw seal controled shower and eye wash separately.

3.Set the seepage hole in the pipe of eye wash that can drain off the residual water,which clean pipe to prevent rust.

*Main material: SUS304 stainless steel

*Installation and maintenance

1. You should check the type of products, certificate of approval, instruction and the packing list for another time.

2. The location of the emergency equipment should be installed within 10 seconds walking time or 15 meters from the hazard.

3. Installation and maintenance:

A.connect the T-piece stainless steel pipe of outlet,inlet,body shoer pipe ,then connect with the bracket.

B.fix the shower handle and shower head on the stainless steel pipe.

C.connect the eye wash bowl with body stainless steel pipe.

D.intal the eye wash shower into the pipe through eye wash bowl.

E.instal the push board and foot treadle.

F. choose the raght place to connect the pipe of water inlet and fix the bracket tightly.

G.The adjust valve is in the middle of the two sprayers which can adjust the flux. It may need to adjust because of the different pressure and flux; though we adjust it before delivering you. The method of adjust: unscrew the helmet, adjust the adjustive pole with screwdriver, and turn it clockwise, the flux will be small, and turn it widdershins, the flux will be bigger.

*Method of application

1.Pull the shower handle down ,the body shower will work.

2.Please push the board clockwise, when you need eye washing, and the facility will work, pullback the push board withershins, eye wash valve close.

*Maintenance

1. Should using the facility above zero environments, and you should notice the pipeline antifreeze if used in the cold place.

2. please clean the inet pipeline before installation.

3. suggest to install the main valve in the inlet pipe, close the main valve first after using, and close the shower/eye wash valve when clear up the remain water.

*The fault and solutions