SHB2-Double outlet gas fitting,Gas valve/cock,Suspended mounted,slow open gas fitting gas outlets gs valve nipple outlet

SHB2-Double outlet gas fitting,Gas valves/cock,Deck mounted,slow open,needle/press and turn 

   Item  no.:SHB2
Product name:Double outlet gas fitting,Gas valves/cock,Deck mounted,slow open,needle/press and turn 
 Material:brass
Coating:Epoxide resin electrostatic powder
Lubricant: Applicable to combustible gas
Valve:Slowly open/safety(press and turn) Needle

More details,pls visit  www.labppe.com

Gas cock,Gas valve,gas outlets,Gas air valve,fume hoods valve,air release valve,air bleed valve,air gas outlet valve,gas nipple airtap,Gas Outlet

Lab Furniture accessories & Lab Fittings:

Lab Fume Hoods valves,Lab water gas Faucets,Lab air taps,Lab fume exhaust,Fume extractor,Lab PP sink,Lab drying rack,Lab drainage pegboard,Pegboards & drip trays,Epoxy Pegboard Glassware Drying Rack,

ILLUSTRATIONS OF THE SAFETY GAS VALVE

*USAGE

This product is gas control equipment when using laboratory gas.

*PERFORMANCE:

1. Materials: Thickened brass, high pressure intensity; high gloss epoxy coating; corrosive and heat resistance; UV fading.

2. Sealing: part of sealing is polyurethane, wear-resistant, impact of high. High grade grease, low wear rate.

3. 90°turn on, operating high-speed, flexible.

4. Security: safety-press equipment, high safety coefficient, avoiding human carelessness handle touching, cause air leakage.

*INSTALLATION:

1. before installation: Clear the airway, using air compressed clear gas airway impurities. The prevention of impurities goes into the body of gas valve, lead to seal part abrasion and leakage.

2. This series of air valve matches with G1/2” hose connector.

3. Using: push on the handle to the pin leaving the pin positioning groove, anti-clockwise rotation of 90° for the open; clockwise rotation of 90° pin reset and closed.

* MAINTENANCE:

If there is dirty on the air nozzles, you only need to clean them with detergent or soap water, wash them with cleaning water, and dry them with soft cloth. Never use the detergent that has the grinding function detergent, the abrasive papers, or tissues.

ILLUSTRATIONS OF THE SAFETY GAS VALVE

*USAGE

This product is gas control equipment when using laboratory gas.

*PERFORMANCE:

1. Materials: Thickened brass, high pressure intensity; high gloss epoxy coating; corrosive and heat resistance; UV fading.

2. Sealing: part of sealing is polyurethane, wear-resistant, impact of high. High grade grease, low wear rate.

3. 90°turn on, operating high-speed, flexible.

4. Security: safety-press equipment, high safety coefficient, avoiding human carelessness handle touching, cause air leakage.

*INSTALLATION:

1. before installation: Clear the airway, using air compressed clear gas airway impurities. The prevention of impurities goes into the body of gas valve, lead to seal part abrasion and leakage.

2. This series of air valve matches with G1/2” hose connector.

3. Using: push on the handle to the pin leaving the pin positioning groove, anti-clockwise rotation of 90° for the open; clockwise rotation of 90° pin reset and closed.

* MAINTENANCE:

If there is dirty on the air nozzles, you only need to clean them with detergent or soap water, wash them with cleaning water, and dry them with soft cloth. Never use the detergent that has the grinding function detergent, the abrasive papers, or tissues.