|
[China]
Trade Verify
Address: WEST SIDE OF BOZHOU ROAD AND LUZHOU ROAD INTERCHANGE,ZHONGYUN FIRST INDUSTRIAL PARK,JIAOZHOU,QINGDAO,CHINA.
Contact name:AORUI
QINGDAO AORUI PLASTIC MACHINERY CO.,LTD1 |
|
Verified Suppliers
|
|
|
WPC Machine / Wood Composite Panel Production Line / WPC Profile Board Extrusion Machine
Quick detail:
Properties and advantages of WPC:
Novel material class ,developed for optimising properties of
classical products,e.g.Improvement of mechanical material
properties
Enhancement of possibilities for classical wood products by using
extrusion process
Advantages through continuous production process Improvement of
flow properties of thermoplastic material
Reduction of plastics part at the finished crticle to protect
exhaustible raw materials
Use of renewable resources
Formulation with PE,Polyolefins or other thermoplastics
Description:
1. Rising energy costs and a growing ecological awareness are
leading to consistent development of the the complete extruder
design.
This development affects all energy relevant components and
elements of the extruder and leads to a hightended overall
efficiency of the unit.The relevant components include above all:
1.Motor and drive section
2.Barrel heating resp.Cooling
3.Screw temperature control
4.Optimizing the processing unit
Specifications:
| Feeder | • To feed material into extruder; |
| Extruder | • World famous brand electrical component such as
Siemens,Schneider, ABB etc; • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Bimetallic screw and barrel; • Intelligent PLC controlling system with human-friendly interface. |
| Die head | • 3Cr13/3Cr17 material •Complete set include extrusion die head, calibrator and cooling tank • Apply to PVC wood-plastic foamed and PE PP wood-plastic cold push direct extrusion process |
| Vacuum calibration table | • Include full set of vacuum and water pump • Width: 240mm • Length: 6000mm • Independent operation panel for easy operation |
| Haul off | • Upper and lower caterpillar is driven separately and speed
control by frequency inverter • Fast change type pads for easy operation • Install plate is adopts aluminum material • Compacting driving by pneumatic |
| Cutter | • Tracking cutter or lifting saw cutter with adopts double station
dust collection system •Synchronous drivingby air cylinder or servo motor control |
| Stacker | •Stainless steel304 as touching material •Discharge driving by air cylinder |
| Embossing machine/Brushing machine/sanding machine/lamination machine/hot stamping machine | • Surface treatment of final product |
Competitive Advantage:
Technical and after-sales service:
The supplier the following technical and after-sales service
commitment
A) Provide on-site installation guide;
B) Responsible for the commissioning of equipment;
C) Responsible for the buyer's personnel mount guard before the
operation and maintenance training;
D) One year free warranty (due to the buyer's improper operation
caused by damage charge costs), and ensure the supply of spare
parts for a long time, only receive the cost.
E) Provide technical advisory services for a long time
