Active Member
|
[China]
Address: Industrial Zone 188, Chongshou Town,Cixi ,Ningbo,Zhejiang, China
Contact name:Jerry Fan
Ningbo Shuangde Tianli Machinery Manufacturing Co., Ltd. |
|
|
One Head One Layer Double Station Blow Molding Machine for Plastic Milk Bottle SLX-55
SLX series:
1: This machine is suitable for PP, PE, EVA, PS, ABS, TPR, TPV and other raw materials such as blow molding with.optimized Die Head Flow Path
2: hydraulic system: optimize the hydraulic circuit design, running stable, high eficiency, low energy consumption, hydraulic components
using the international well- known brands, installation and maintenance convenient.
3 When working in the dangerous area of the auxiliary equipment,
please power off the power switch of the auxiliary equipment.
Please check the auxiliary equipment regularly.
Manual control devices should be installed where dangerous areas
can be clearly seen.
If the operation area of the auxiliary equipment is next to the
dangerous area, please install one more Emergency Stop Button.
This machine is suitable for bottles, detergent bottles, oil pot, plastic toys, cosmetics bottles, beverage bottles, chemical Hardware
etc..
| SPECIFICATION | SLX-55 | |
| MATERIAL | PE,PP,EVA,ABS,PS | |
| MAX CONTAINER CAPACITY | L | 2 |
| NUMBER OF DIE HEAD | SET | 1,2,3,4,6 |
| OUPUT(DRY CYCLE) | PC/HR | 1000x2 |
| MACHINE DIMENSION (LxWxH ) | MM | 3200x1600x2200 |
| TOTAL WEIGHT | TON | 3T |
| CLAMPING UNIT | ||
| CLAMPING FORCE | KN | 40 |
| PLATEN OPENING STROKE | MM | 120-420 |
| PLATEN SIZE(WxH) | MM | 360X300 |
| MAX MOULD SIZE(WxH) | MM | 240x400 |
| MOLD THICKNESS | MM | 105-200 |
| EXTRUDER UNIT | ||
| SCREW DIAMETER | MM | 55 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 45 |
| BARREL HEATING POWER | KW | 12 |
| NUMBER OF HEATING ZONE | ZONE | 3 |
| EXTRUDER MOTOR RATED POWER | KW | 7.5(11) |
| DIE HEAD | ||
| NUMBER OF DIE HEATING ZONE | ZONE | 2-5 |
| POWER OF DIE HEATING | KW | 6 |
| CENTER DISTANCE OF DOUBLE DIE | MM | 1320 |
| CENTER DISTANCE OF THREE DIE | MM | 80 |
| CENTER DISTANCE OF FOUR DIE | MM | 60 |
| CENTER DISTANCE OF SIX DIE | MM | 60 |
| MAX DIE-PIN DIAMETER | MM | 150 |
| POWER | ||
| MAX DRIVE POWER | KW | 18 |
| TOTAL POWER | KW | 22 |
| FAN POWER OF SCREW | KW | 0.42 |
| AIR PRESSURE | MPA | 0.6 |
| AIR CONSUMPTION | M3/MIN | 0.4 |
| AVERAGE ENERGY CONSUMPTION | KW | 8 |
