|
[China]
Trade Verify
Address: Xianke Building Bagua 4th Rd Shenzhen China
Contact name:Xiang
Shenzhen HYPET Co., Ltd. |
|
Verified Suppliers
|
|
|
20mm - 110mm PVC pipe production plant extrusion line with best performance
Whole production line composition:
Auto loader - Extruder - Die head - Vacuum tank - Printer - Haul off unit - Cutter - Stacker
Auxiliary machine for option:
Belling machine;
High speed mixer;
Crusher;
Pulverizer;
Chiller;
Air compressor.
Machine features:
a. The screw barrel adopts special designed wind cooling system,
which makes repair quite easy.
b. 51/105 extruder can be used with output 200kg/h or 55/120 with
output 280kg/h can be selected
c. Can be used as water supply pipe, drain pipe, high calcium pipe,
etc.
c. Siemens PLC controls the entire production line, HYPET software,
and high configuration
k. The vacuum box is natural color, paint-free, high-quality, and
high-precision control.
d. When the bimetal barrel screw is standard formula, the shelf
life of the screw barrel is 3 years
l. High cost performance, high quality and lowest price.
Condition of use
1. Technical features of whole line
| SN | Specification | Description | Remark |
| 1 | Suitable material | PVC powder | |
| 2 | Pipe diameter range | Ø20-Ø110mm | |
| 3 | Production speed | 1.5 ~ 15 m/min | |
| 4 | Max. output | 140kg/h | |
| 5 | Test and accept | Based on HYPET standard formula. | |
| 6 | Center height | 1,000mm | |
| 7 | Whole line size (L x W x H) | 21,000 x 1,200 x 2,450mm |
2. Circumstances condition
| SN | Condition | Specification | Description |
| 1 | Natural circumstance condition | Working place | Indoor use |
| Power source | No dangerous area | ||
| Humidity | 55%~85% no condensation | ||
| Temperature | 0~40 ℃ | ||
| 2 | Electricity source | Installation capacity | 100 kW |
| Actual power consumption | 30 kW | ||
| Power supply | 3P+N+PE | ||
| Voltage/Frequency | 380V/50Hz, others can be optional | ||
| 3 | Cooling water | Temperature | ≤15 ℃ |
| Water pressure | ≥0.3MPa | ||
| Flow | ~15 m3/h | ||
| 4 | Air condition | Compressor air pressure | ≥0.6MPa |
| Flow | ~0.9 m3/min |
Terms & conditions
1. Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer according to the rule.
3) Training on field operation and maintenance for customer's personnel.
4) Provide technical consultation service on long-term basis.
2. Installation and debugging
When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.
3) This Price does not included commission and installation in buyer’s factory.
3. Pricing
1) The above mentioned quotation is valid within 30 days counted from the issue date of quotation.
2) The price and machinery configuration should be updated and confirmed by the Seller in the case that the quotation has been beyond the validity period.
4. Terms of payment
1) T/T and L/C (irrevocable, at sight) both are acceptable.
2) 30% of the total contract value should be paid in advance, balance 70% of the total value is to be paid before shipping at the Seller’s factory.
5. Time of delivery
1) When the contract becomes valid, the machine should be delivered within 50 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.
2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.
