|
[China]
Trade Verify
Address: Xianke Building Bagua 4th Rd Shenzhen China
Contact name:Xiang
Shenzhen HYPET Co., Ltd. |
|
Verified Suppliers
|
|
|
Plastic Extrusion Line / PVC Four Conduit Pipe Production Line
Plastic Extrusion Line Machine Special features :
Plastic Extrusion Line Machine Production line:
| SN | Plastic Extrusion Line Parts name | Quantity |
| 1 | Conic twin screw extruder HYZS-80/156 PLC Siemens control system | 1 set |
| 2 | Auto-loader for extruder in spring type. | 1 set |
| 3 | Die head for Four pipe:16, 20, 25, 32mm, in 2~3 pressure grade. | 1 set |
| 4 | Auto control vacuum tank in 6m in four station | 1 set |
| 5 | Haul off unit in four station, is 2 belt with 4 rows type | 1 set |
| 6 | Dustless cutter in four station | 1 set |
| 7 | Automatic package machine | 1 set |
Plastic Extrusion Line Autopackaging machine:
| PVC Conduit Pipe Machine Specification | Plastic Extrusion Line Description |
| Production pipe diameter range | Ø16-Ø30mm |
| Strapping film material & thickness | LLDPE stretchable film, thickness: 0.03~0.05mm |
| Strapping film width | 50 mm |
| Strapping film plastic core OD | 40 mm |
| Strapping film outer diameter | 140 mm |
| Stretch film laps | 3 turns (adjustable) |
| Number of strapping sections Pipe length | ≤3000 mm is three sections, >3000 mm is four sections, which can be adjusted according to actual conditions. |
| Strapping and winding position | 150 mm ± 50 sections at both ends of the pipe. The pipe is automatically calculated according to the length of the pipe and the bundling position is calculated. |
| Bag material PE bag | 0.04~0.06mm |
| Bag width | 225mm (0~+10) |
| Bag core diameter | 76mm |
| Bag roll outer diameter | 300mm |
| Packing method | Winding&bundling, bagging (PE film), bag end heat seal. |
| Pipe counting method | Mechanical baffle counting and stainless steel trough both ends with weighing sensor weighing and counting double counting function simultaneously counting to ensure accurate counting |
| Binding packaging data | |
| Nominal outer diameter (mm) | Packing quantity (bar / tie) |
| Ø16/20/25/32 | 35/30/20/10 |
| Packing pipe length | 2.6-4m |
| Each packaging cycle | 2.6 meters 43 seconds, 4 meters 52 seconds |
| Packing pass rate | over 99% |
| Dimensions L × W × H | 11850x1555x1533mm |
Plastic Extrusion Line Other terms
1. Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer according to the rule.
3) Training on field operation and maintenance for customer's personnel.
4) Provide technical consultation service on long-term basis.
2. Installation and debugging
When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and
manpower for the commissioning of the order.
3) This Price does not included commission and installation in
buyer’s factory.
3. Time of delivery
1) When the contract becomes valid, the machine should be delivered within 60 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.
2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.
4. Debugging charge
The buyer pays for the plane ticket of round-trip abroad and food and accommodation of buyer’s country during debugging. And the wage of technicians should be paid by the customer (100USD/day).
5. Guarantee clause
1) Guarantee is 1 year (excluding human factor and wearing parts).
2) Under proper working conditions, 12 months from the date of
completion of commissioning at the buyer's site, and should be at
the latest within 14 months from the issuing date of Bill of
Lading.
