Shenzhen HYPET Co., Ltd. |
Verified Suppliers
|
|
Polyethylene Extruder Machine / Small Single Screw Extruder Machine SJ45
Polyethylene Extruder Machine / Small Single Screw Extruder Machine SJ45 Our Feature:
Polyethylene Extruder Machine / Small Single Screw Extruder Machine SJ45 The Machine Main Parameters:
SN | Parts name | Specification | Description |
1 | Extruder | Extruder model | HYSJ-45/33 single screw |
Output | 55-85 kg/h | ||
Center height | 1,000mm | ||
Weight | 2,100kg | ||
2 | Electrical Control system | Detachable control panel | Digital display, adjusting knobs |
Components brand | Siemens, RKC, ABB, etc. | ||
Note: PLC computer control system can be optional. | |||
3 | Screw | Diameter | Ø45 mm |
Screw ID ratio | 33:1 | ||
Material | 38CrMoAlA + special alloy | ||
Max rotate speed | 100 r/min | ||
Core of the screw | Auto control for temperature | ||
4 | Barrel | Inside finish | Nitrogen-filled (0.50~0.70mm depth) |
Heating control area | 4 areas | ||
Heating way | Copper cooling fins with ceramic heater | ||
Heating power | 8 kW | ||
Cooling system | Low-noisy barrel cooling fan | ||
Cooling power | 0.20kW x 4 sets | ||
5 | Gear box | Gear surface | Hardened and ground in high precision |
Axis material | 40Cr | ||
6 | Driving motor | AC motor power | 22 kW |
AC inverter controller | ABB or Fuji |
Polyethylene Extruder Machine / Small Single Screw Extruder Machine
Terms & conditions
1. Polyethylene Extruder Machine / Small Single Screw Extruder Machine Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer according to the rule.
3) Training on field operation and maintenance for customer's personnel.
4) Provide technical consultation service on long-term basis.
2. Polyethylene Extruder Machine / Small Single Screw Extruder Machine Terms of payment
1) T/T and L/C (irrevocable, at sight) both are acceptable.
2) 35% of the total contract value should be paid in advance, balance 65% of the total value is to be paid before shipping at the Seller’s factory.
3. Polyethylene Extruder Machine / Small Single Screw Extruder Machine Time of delivery
1) When the contract becomes valid, the machine should be delivered within 30 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.
2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.