Home Companies Changzhou JJ Displaylit Equipment Co.,Ltd

4 Foot Led Explosion Proof Fluorescent Lights Bulbs 220V Pendant Install Industry Tube T8

Contact Us

[China]

Trade Verify

Address: Maoye Business Cube ,Wujin, Changzhou,Jiangsu, China

Contact name:Emma Zhou

Changzhou JJ Displaylit Equipment Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

4 Foot Led Explosion Proof Fluorescent Lights Bulbs 220V Pendant Install Industry Tube T8

Country/Region	china
City & Province	changzhou jiangsu

Product Details

4 Foot Led Explosion Proof Light Bulbs 220V Pendant Install Industry Tube T8

Component
1. PC flame-retardant mask, high light transmission, waterproof and moisture-proof, corrosion-resistant
2. Optimal LED light source, high luminous efficiency, long life, economical and durable, energy saving and environmental protection
3. The aluminum alloy shell is formed by die-casting steel plate, and the surface is sprayed with plastic, anti-static, and the surface is smooth and flat.
4. The seams are connected by stainless steel screws

Applications:

1. Widely used in petroleum exploitation, refining, chemical industry, lamp dangerous environment and offshore oil platform, oil tanker lamp place as general lighting;
2. Suitable for places with high protection requirements and wet lakes:
3. Suitable for explosive gas environment of zone 1 and zone 2 places;
4. Suitable for IIC explosive gas environment; Suitable for T6 temperature group;
5. Applicable to oil field, petrochemical, electric power, drilling, chemical enterprises and other flammable and explosive dangerous places

Specification:

Ex Marking	Ex d e IIC T4 Gb; Ex tD A21 IP66 T80℃
Classification	Group II, Catogory 2 GD; Class I, Division 1 and 2,Zone 1, 2 & Zone 21, 22
IP Degree	IP66
Corrosion Resistant	WF1
Input Voltage	110-220VAC, 50/60HZ
Conduit Entries	G 3/4”
Battery Back-up	Optional, Emergency time>90min;Charging time:24h;Starting time:0.3s
Mounting Styles	Pendant; Ceiling; Chain; Embedded; Wall; Stanchion

**Ordering Information**
Model No.	BYS600	BYS1200
T8 Fluorescent Tube	(1~3)*18W(1350Lm, 75lm/W)	(1~3)*36W(2700Lm, 75lm/W)
T5 Fluorescent Tube	(1~3)*14W(1350Lm, 96lm/W)	(1~3)*28W(2100Lm, 75lm/W)
LED Tube	(1~3)*8W(800Lm, 100lm/W)	(1~3)*18W(1800Lm, 100lm/W)

The BYS-2X18W Explosion Proof Fluorescent Fixture from Crown Extra is ATEX/IECEx approved for Zones 1 and 2 and 21 and 22. This 18-watt unit is equipped with two, 4-foot T8/T6 LED tube lamps that operate on 220-240V AC.(can choose LED tube) The IP66-rated fixture is made out of non-sparking materials that are highly resistant to rough impacts (IK10). This fluorescent lamp can be mounted on ceilings or walls using a pair of stainless steel mounting brackets.

Operation precautions:
1. Don't switch explosion-proof and anti-corrosion fluorescent lamps too frequently;

2. If the voltage is very low, the two stages of the lamp will emit tungsten at the beginning of lighting, which will cause a lot of dot-shaped pollutants inside the lamp, which will become one of the reasons for the damage of the lamp. Therefore, it is recommended to Turn on the lights under high voltage conditions;

3. Explosion-proof and anti-corrosion fluorescent lamps have many lines and need auxiliary devices, so they must be used in conjunction with corresponding transformers, capacitors, etc. to ensure that the lamp is started to a suitable power;

4. Pay attention to maintain a ventilated environment, not only to take away the dust, but also to reduce the temperature of the lamp, so as to extend the life of the lamp.

Company introduction:

Changzhou JUJUN Ex-proof company is a comprehensive enterprise integrating R&D, production, sales and service.
We mainly produce and operate maintenance-free LED explosion-proof lamps, explosion-proof lamps, explosion-proof electrical appliances, explosion-proof accessories, low-voltage electrical components, molds, power distribution switch control equipment and other products.
It is located in the Yangtze River Delta region, on the verge of Shanghai, with convenient transportation, welcome customers to visit our factory.

FAQ:
1. who are we?
We are based in Jiangsu, China, start from 2016,sell to North America(20.00%),Central America(15.00%),Eastern Asia(12.00%),South Asia(10.00%),Mid East(10.00%),Southeast Asia(10.00%),Domestic Market(4.00%),Africa(4.00%),South America(2.00%),Northern Europe(2.00%),Eastern Europe(1.00%),Oceania(1.00%),Southern Europe(1.00%),Western Europe(1.00%). There are total about 101-200 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Spray booth,prep station,car washing machine,car lift,powder coating line

4. why should you buy from us not from other suppliers?
Yancheng Biaosin Import&Export Co.,Ltd is in yancheng city,in charge of the export and import of jiangsu jing-zhongjing industry coating equipment. We're enterprise specializing in manufacture and sales of industrial painting equipment,and relaited machine

Products details: