Changzhou JJ Displaylit Equipment Co.,Ltd |
Verified Suppliers
|
|
ATEX Approved 8 Inch Explosion Proof Blower 220V 380V Explosion Proof Exhaust Fan
Type: | BFAG |
Ex rate: | Ex d IIB T4 Gb |
Degree of protection | IP54 |
Rated voltage | 220/380VAC |
Size of blade | 300; 400; 500; 600 |
Power consumption | 120; 180; 250; 370 |
Air volume (m³/min) | 2200; 2400; 4900; 9500 |
Applications:
1. It is applicable to the places in Zone 1 and Zone 2 of explosive
gas environment;
2. It is applicable to the places in Zone 21 and 22 of combustible
dust environment;
3. Suitable for IIA, IIB and IIC explosive gas environment;
4. Applicable to T1~T6 temperature groups;
5. It is applicable to energy-saving transformation projects and
places where maintenance and replacement are difficult;
6. It is widely used for lighting in oil exploitation, oil
refining, chemical industry, gas station, textile, food processing,
offshore oil platforms, oil tankers and other places.
Installation for Axial Flow Fan and Blower:
-Wall Mount
-Pipe Type
-Position Type
-Fixed Type
Installation Notes:
First, check whether the frame and phoenix leaf are deformed,
whether the fan leaf rotates flexibly, and
whether there is friction. Check that all fasteners are complete
and tight.
The line voltage must match the rated voltage on the motor
nameplate.
Check the insulation resistance of the motor with a soov
megohmmeter. If the resistance value is less than
10MO, use the drying method or the short-circuit current method.
Dry coal treatment to make its insulation resistance greater than
1OMO.
A small explosion-proof switch must be used as a power switch, or
an ordinary switch must be installed in
an outdoor non-explosive hazard.
The outer diameter of the cable connected to the power supply
should be consistent with the sealing ring.
After tightening and pressing the nut, it should be ensured that
the sealing ring is connected to the cable, and
the sealing ring is connected to the outlet nozzle.
No gap, otherwise the flameproof performance will be lost.
The non-wiring part of the explosion-proof motor cannot be
disassembled at will. When wiring, open the
cover of the wiring room, and connect the lead wire to the
terminal. After connecting, cover the cover and
tighten the screws so that the gap between the explosion-proof
surface is less than 0.2mm, and then tighten
the outgoing wire. device so that the leads cannot move.
Pay attention to the protection of the explosion-proof surface
during installation. There should be no bumps
and bumps. If there is damage or corrosion, it should be repaired
according to the "Regulations on the
Treatment of Explosion-proof Surface Defects of Explosion-Proof
Electrical Equipment".
Product Details:
FAQ:
Q: What qualifications does your company have ?
A:Authorization of “AAA Grade Credit Enterprise” from Government
Q: Can I get qualified products? I do not want any shortage ,
damaged products
A: Professional Q.C. (quality control) Team & Testing Equipment
Correspondent and Effective CCS, MED, CE Certificates
Exclusive and Famous Brand” KENPO,SEMPO,HOBOND,FASEAL ,GLM”
Q: How long is the delivery time?
A:1~15days Quick Delivery Time . Abundant Stock Items at Hand Big
Stock Capacity Guarantee (10000㎡-Warehouse)Various Logistics
Option(DHL, TNT, Rail/Air/Sea Freight)
Company information:
Changzhou JUJUN Ex-proof company is a professional LED lighting
manufacturer and it founded in 2011, Specialized in explosion proof
led lights, strobe and sounder light, plug and sockets, switches,
push buttons, junction boxes, exhuast fan, axial flow fan and so
on.
There are 30,00 square meters of factory buildings. With over 10
years of lighting experience, profound industry knowledge in the
field of the explosion proof light, appliances etc.