|
[China]
Trade Verify
Address: 65 EAST XINHUAN ROAD, SHANGHAI, CHINA
Contact name:Bill, George, Michael
ROSCHEN GROUP |
|
Verified Suppliers
|
|
|
Wireline Core Drill Rods NQ HQ PQ Heavy Weight Drill Pipe For Deep Hole Drilling
Heavy Weight Drill Pipe Applications:
Widely used in tunneling, mining, construction, stonework, transportation facility construction etc. Suitable for rock hardness F10-18.
Heavy Weight Drill Pipe advantages:
1. High efficiency, long use life, low price
2. Application: concrete, granite, marble, refractory materia
With ISO certificate & quality control.
The impregnated diamond bits are the most commonly useful bits in
the mineral exploration industry, as they have the widest range of
application. The carefully selected grades of high quality
synthetic diamond are distributed in the depth of impregnated bit's
matrix series. The matrix layer of the ZM contains a uniform
distribution of these crystals that are embedded in a powdered
metal bond.
The matrix of our impregnated bits is designed to expose new
diamonds to the bits' cutting face as wear occurs. Fast penetration
rate is maintained as a result of this action.
Our impregnated bits are manufactured to give optimum penetration rates and bit life, which is required to keep the cost of diamond drilling to a minimum.
The optimum diamond size, concentration and matrix type are
dependent on the hardness and abrasiveness of the formation to be
drilled.
| Drill rod specification: | ||||
| "Q" series: | AQ, BQ, NQ, HQ, PQ, NQ3, HQ3, PQ3, | |||
| "TW" series: | ATW, BTW, NTW, HTW, | |||
| "U" series (underground): | AQU, BQU, NQU, HQU, ATWU, BTWU | |||
| Size | O.D.(mm) | I.D.(mm) | Weight/3m (kg) | Weight/1.5m (kg) |
| A | 43.1 | 36.1 | 11 | 5.5 |
| B | 55.58 | 45.97 | 19.05 | 9.53 |
| N | 69.85 | 60.45 | 23.77 | 11.89 |
| H | 88.9 | 77.72 | 34.88 | 17.44 |
| P | 114.3 | 101.6 | 53.07 | 26.54 |
| ATW | 44.5 | 36.8 | 11.5 | 5.75 |
| BTW | 56.64 | 48.51 | 15.65 | 7.83 |
| NTW | 73.15 | 64.26 | 22.91 | 11.46 |
| HTW | 90.93 | 81.53 | 30.75 | 15.38 |
| Size | Length | OD | ID | Weight |
| Standard Q thread or RQ thread | ||||
| Drill rod, B | 1.5 m | 55.6mm | 46mm | 9.4kg |
| 3m | 18.6kg | |||
| Drill rod, N | 1.5 m | 71mm | 60mm | 13.5kg |
| 3m | 23.7kg | |||
| Drill rod, H | 1.5 m | 89mm | 77.8mm | 17.93kg |
| 3m | 35.84kg | |||
| Drill rod, P | 1.5 m | 114.3mm | 101.6mm | 26.79kg |
| 3m | 52.56kg | |||
| Diamond core drill bits and diamond non-core drill bits Specifications | |
| A-Gauge Core Bits: | A, A-RSG, AWG(AX), AWM, AWT, LTK48 |
| B-Gauge Core Bits: | B, B-RSG, B-2.400, B3, BWG(BX), BWM, BWT, LTK60, TBW |
| N-Gauge Core Bits: | N, NMLC, NWG(NX), NWM, NWT, TNW |
| H-Gauge Core Bits: | N, HMLC, HWF-Long, HWF-Short, HWG(HX), HWT |
| P- Gauge Core Bits: | P, P3, PWF-Long, PWF-Short |
| S- Gauge Core Bits: | SWF-Long, SWF-Short |
| U- Gauge Core Bits: | UWF-Long, UWF-Short |
| Z- Gauge Core Bits: | ZWF-Long, ZWF-Short |
| T, TT, T2 &TB Series Metric Core Bits: | T36, TT46, T2-46, TB56, TT56, T2-56, T2-66, T2-76,T2-76 coreline, T2-86, T2-86 coreline, T2-101, T2-101 coreline |
| T6 Series Metric Core Bits: | T6-76, T6-86, T6-101, T6-116, T6-131, T6-146 |
| T6S Series Metric Core Bits: | T6S-76, T6S-86, T6S-101, T6S-116, T6S-131, T6S-146 |
| Q Series: | AQ, BQ, NQ, HQ, PQ/AQTK, BQTK, BQ3, NQ2, NQ3, NQTT, HQ3, HQTT, PQ3, PQTT |
| T2 Series: | T2 46, T2 56, T2 66, T2 76, T2 86, T2 101 |
| T6 Series: | T6 76, T6 86, T6 101, T6 116, T6 131, T6 146, T6S 101 |
| T Series: | T36, T46, T56, T66, T76, T86 |
| Z Series: | Z46, Z56, Z66, Z76, Z86, Z101, Z116, Z131, Z146 |
| B Series: | B36, B46, B56, B66, B76, B86, B101, B116, B131, B146 |
| WF Series: | HWF, PWF, SWF, UWF, ZWF |
| WT Series: | RWT, EWT, AWT, BWT, NWT, HWT |
| WM Series: | EWM, AWM, BWM, NWM |
| WG Series: | EWG, AWG, BWG, NWG, HWG |
| Others: | NMLC, HMLC, LTK48, LTK60, BGM, NGM, ADBG, TBW, TNW, ATW, BTW, NTW, NXD3, AX, NX, NXC, AXT, T6H, 4 9/16, NWD4, 412F, SK6L146, TT46, TB56, TS116, CHD101. |
| Customized standard | CDDA, DCAMA, Crealius, and ISO sizes . |
Pictures
