Active Member
|
[China]
Address: IV-30 Wire Mesh Industry Zone,Anping,Hengshui,Hebei,China 053600
Contact name:Anny
Anping Source Wire Mesh Co.,Ltd |
|
|
3MM Thickness Architectural Aluminum Expanded Metal Building Facade Solution Product Description
Material:Aluminum plate, aluminum alloy plate.
Hole shape: Diamond-shaped holes are the most popular.And other hole types include hexagonal, round
holes, triangular, and fish scale holes
Range of thickness:0.4mm—1.0mm 0.8mm—1.0mm 0.3mm—1.5mm 0.1mm—9mm
Aperture:0.5x1mm,1x2mm,1.25x2.5mm,1.5x2.5mm,1.6x3.2mm,2x3mm, 3x4mm,3*5mm,3*6mm,4*8mm,
5*10mm,6*12mm,8*16mm,10*20mm,12*25mm,15*30mm , 20x40mm, 25x50mm , 30x60mm, 40x80mm,
50x100mm, etc .
Hexagonal hole; Fish scale hole (for use in lampblack hood)
Surface Treatment: baking paint, anodizing, pvc / powder coated, spraying, fluorocarbon spraying , etc
Characteristics: Not easy to rust, beautiful color,elegant appearance; The panel is lightweight
and has strong bearing capacity; Sturdy and durable, high safety performance.
1. the oil and dirt removal of aluminum mesh and its organic chemical solution shall be solved before, so as to create a chromized film, improve the adhesion and oxidation resistance between the coating and the metal surface, which is beneficial to the service life of the paint layer.
2. the finish coat, as the finish coat of the closed wall or material, its effect depends on improving the anti penetration ability of the coating, improving the maintenance of the wall or material, stabilizing the surface of the metal material, improving the adhesion between the paint and the metal surface, and being able to balance the color of the paint coating, with a film thickness of 5-10 μ M.
3. Paint coating. The paint is an important layer of the paint coating, which depends on the necessary decorative color of the aluminum profile, so that the appearance of the aluminum profile can meet the requirements of the design scheme, and the metal surface will not be damaged by the external natural environment air, acid rain and environmental pollution, so as to avoid the penetration of ultraviolet light and improve the working capacity. The thickness of the paint is about 25-30 μ M.
4. the finishing paint is also the top coat. The key goal is to reasonably improve the external corrosion resistance of the paint film, maintain the paint coating and improve the metal texture of the paint color. The appearance is more unique in color. The thickness is about 5-10 μ M.
This color chip apply to PVC,Epoxy,PCDF Coating
Case 1:
Case 2:
CASE 3:
How to prevent oxidation of aluminum mesh?
1. in terms of packaging, it is important to control temperature and humidity. Therefore, the humidity of the packed wooden shaft and box plate shall not be greater than 18%, and the temperature of the packed aluminum coil shall not be greater than 45 ℃.
2. if it is transported from a low temperature area to a high temperature and humidity area, do not immediately open the sealed packaging. In order to make the aluminum mesh have time to adapt to these environments, the aluminum coil shall not be placed in the rain and snow place on the roof of the workshop and warehouse. Strengthen air drying management to ensure that there is no moisture in the compressed air. An appropriate amount of desiccant shall be put into each roll. To reduce the contact between the surface of aluminum mesh and air and moisture
