Sinuo Testing Equipment Co. , Limited |
Verified Suppliers
|
|
IEC 61851-21-2 Electric Vehicle Charging Systems EMC Test Chamber
Complied Standards & Clauses
IEC 61851-21-2: Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply – EMC requirements for off-board electric vehicle charging systems
IEC61851-1: Electric vehicle conductive charging system – Part 1: General requirements
IEC 61851-23: Part 23: DC electric vehicle charging station
Equipment Overview
Charging stations for electric vehicles are a very important part of supporting products for electric vehicles. If consumers cannot easily find charging stations tocharge their electric vehicles or wait for a long time for charging, their enthusiasm to buy electric vehicles will decline, in order to meet the requirements of consumers. Must be a lot of arrangement of charging stations and increase the power stations in order to improve the power of the stations in order to improve the charging speed, but the electric car charging stations as a power grid and electric vehicles in the city between electrical and electronic equipment, the electromagnetic compatibility of the charging station need to have strict requirements, so as to ensure the charging station in the grid to the safe and stable operation and no interferences with other equipment.
Main Configuration
No. | Systems |
1 | Conductivity - Emission Test System |
2 | Harmonic flicker test system |
3 | Conducted RF immunity test system |
4 | RF radiated immunity test system |
5 | Power frequency magnetic field immunity test system |
6 | EMS transient immunity test system |
7 | Anechoic Chamber |
Q: This system is based on which design criteria?
A: Design criteria:
Q: What is the Conductivity - Emission Test System?
A: This system is mainly measuring test apparatus (the EUT) under
normal operating state by the power supply line (conduction
disturbance), or spatial radiation mode (radiation disturbance low
frequency magnetic fields, electric field radiation disturbance)
the interference generated by the surrounding environment. EMI test
receiver system consists, artificial network (the LISN), the
radiation receiving antenna, and a dedicated test software
components to meet the requirements of the relevant standards
CISPR, FCC, MIL etc.