|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 61000-4-2 Electrostatic Discharge Immunity ESD Generator
Complied Standards & Clauses
IEC 61000-4-2/GB T17626.2: Electrostatic discharge immunity test
ANSI/ESD STM5.2: For electrostatic discharge susceptibility test: machine model-component level
EIA/JESD22-A114-B: Electrostatic discharge sensitivity test: Human Body Model (HBM)
EIA/JESD22-A115-A: Electrostatic discharge sensitivity test: machine model (MM)
ISO10605: Road vehicles-test methods for electrical disturbances from electrostatic discharge
ANSI/ESD STM5.1: For electrostatic discharge susceptibility test:
Human Body Model (HBM)Component
Equipment Overview
Samples and Resrictions: Various types of electronic circuits and equipment
Application: Electrostatic Discharge Immunity Test mainly checks the discharge
(direct discharge) caused when a person or an object touches the
device and the impact on the device when a person or an object
discharges (indirectly discharges) to nearby objects of the device.
Test Principle:
The intelligent electrostatic discharge generator is a high-reliability, which is specially designed according to the characteristics and requirements of the electrostatic discharge immunity test. IEC mode test, HBM mode test and MM mode test can be easily carried out by changing the discharge modules.
Structure:
Electrostatic discharge can produce 1-50A discharge current in 0.5-20ns time. Although the current is large but due to the short duration, so less energy. Electrostatic discharge generally does not harm people but may have devastating effects on electronic products such as integrated circuit chips.
Technical Parameters
| Control & Operation | Electrical control and touch screen intelligent operating system |
| ESD Electrostatic Discharge Model |
|
| Output Voltage | 0.1~20KV±5%, optional 0.1~30KV±5% |
| Discharge Interval | 0.05-30s |
| Number of Discharges | 1-9999 |
| Output Polarity | Positive/negative |
| Discharge Mode | Contact discharge/air discharge |
| Discharge Method | Manual / Auto |
| Discharge Network | Capacitor 150Pf / resistance 330Ω (IEC), replaceable |
| Discharge Current Rise Time | 0.6~1ns |
| Test Mode | Single, count, 20pps, air gap discharge, contact discharge, IEC level |
| Standard Configuration | Discharge gun, high voltage generator, built-in RC module, discharge electrode, data |
| Optional | Custom RC modules(eg100pF/1500Ω (EDS),150pF/150Ω(EDS), 500pF/500Ω (EDS), 500pF/5000Ω (EDS), 200pF/0Ω (EDS)); Electrostatic discharge test stand (test table 1600x800x800mm, all solid wood, meeting IEC 61000-4-2requirements; Reference grounding plate 2700x1800mm, horizontal coupling plate 1600x800mm, vertical coupling plate 500x500mm; Grounding high voltage resistor 2x470 kΩ) ESD calibration unit (for waveform calibration of IEC/EN61000-4-2, including 2-ohm target / 4 GHz, coaxial cable); Attenuator |
| Test Configuration Layout |
|
