|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 61851 EVSE Connector Plug Cable Strain Relief Testing Equipment
Complied Standards & Clauses
IEC 61851-1 2017 Electric vehicle conductive charging system - Part 1: General requirements clause 11.6.
IEC 62196-1 Ed.4CDV 2020 clause 25.3 Figure 17 and table 11.
IEC60309-1: 2012 clause 23.3, etc.
Equipment Overview
This cable strain relief test equipment is used to test the
vehicle plugs, and socket-outlets, connectors to withstand the
specified pull force and torque.
Pull is realized by single-phase speed-regulating motor to drive
the eccentric mechanism, the motor speed is adjustable, to ensure
the accurate time for each pull force applied; torque is achieved
by releasing the torque weight by air cylinder.
Technical Parameters
| Operation Method | Button operation |
| Drive Mode | Motor and cylinder |
| Pull Force Weights | 40N*2, 50N*2, 60N*1, 110N*1,250N*1 Can achieve 160N, 200N, 240N, 250N,500N,600N pull force |
| Torque Weights | 6N*1, 7N*1, 12N*1, 15N*1, 23N*1, 110N*1 Can achieve 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m torque |
| Torque Arm | Ф200mm |
| Pull Frequency | 1 cycle/s |
| Pull Cycles | 1-999999 cycles, can be preset, default 100 cycles |
| Torque Applied Time | 0-99999.9S, can be preset, default 1 min |
| Fixture | One set of universal fixtures |
| Equipment Dimensions & Weight | L 1560mm*W 600mm*H 1530mm, approx. 220KG |
| Power Supply | Single phase AC220V±10%, 50/60Hz or AC110V, 60Hz |
