Active Member
|
[China]
Address: Rm. 3306, Int'l Tech Bldg., No. 3007, Shennan Middle Road, Shenzhen, Guangdong, China
Contact name:Tina
Shenzhen Topmay Electronic Co., Ltd. |
|
|
Mini Box 5mm Metallized Polyester Film Capacitor 105J100V MKT Pitch 5mm
Features
Little volume and weight, extensive capacity range, great specific volume.
Good Self-cure ability, long life.
Suitable for directc current, and block, bypass, coupling, and filtering of VHF signal.
Especially applicable to color TV, programmable exchanger and military complete machines.
Configuration
Coiled with dielectrics and electrodes made of metallized polyester films, conducting cp wire down-leads in a single direction. Rectangular enclosure adopts self-extinguishing plastics and encapsulated with antiflaming araldite.
Characteristic:
1) Box type provides the identical outer apparance
2) Wide capacitance range, small size, high capacitance rate
3) Long life due to self-healing effect
4) Suitable for blocking, by-pass and coupling of DC and signals to
VHF range
5) Widely used in filter, noise suppression and low pulse circuits
6) Rated voltage: 50V, 63V, 100V
7) Capacitance range: 0.010 - 10.0μF
8) Capacitance tolerance: ±5% (J), ±10% (K)
Specifications:
| Referance Standard | IEC 60384-2, GB/T7332-1996 | |||||||||||||
| Climatic Category | 40/85/21 | |||||||||||||
| Rated Voltage | 100VDC | |||||||||||||
| Capacitance Range | 1uF | |||||||||||||
| Capacitance Tolerance | ±5%(J) | |||||||||||||
| Voltage proof | 1.6UR(5s) | |||||||||||||
| Dissipation Factor | ≤0.1%(20℃, 1KHz) | |||||||||||||
| Insulation Resistance | C≥0.33 uF | C≤ 0.33 uF | ||||||||||||
| UR >100V | UR≤ 100V | UR >100V | UR≤ 100V | |||||||||||
| 2500S | 1250S | 7500MΩ | 3750MΩ | |||||||||||
Packing:
Bulk, Ammo, T&R
Part Number System
OUTSIDE MARKS FOR CAPACITANCE:
| PF | 100 | 1000 | 10000 | 100000 | 1000000 |
| NF | 0.1 | 1.0 | 10.0 | 100.0 | 1000.0 |
| μF | 0.0001 | 0.001 | 0.01 | 0.1 | 1.0 |
| Code | 101 | 102 | 103 | 104 | 105 |
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality.
Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production
average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than
that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a
quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.
