Active Member
|
[China]
Address: Rm. 3306, Int'l Tech Bldg., No. 3007, Shennan Middle Road, Shenzhen, Guangdong, China
Contact name:Tina
Shenzhen Topmay Electronic Co., Ltd. |
|
|
CL23X 224J100V P5MM Metallized Polyester Film Capacitor for Automotive Electronics
Features
Little volume and weight, extensive capacity range, great specific volume.
Good Self-cure ability, long life.
Suitable for directc current, and block, bypass, coupling, and filtering of VHF signal.
Especially applicable to color TV, programmable exchanger and military complete machines.
Configuration
Coiled with dielectrics and electrodes made of metallized polyester films, conducting cp wire down-leads in a single direction. Rectangular enclosure adopts self-extinguishing plastics and encapsulated with antiflaming araldite.
Specifications:
| Referance Standard | IEC 60384-2, GB/T7332-1996 | |||||||||||||
| Climatic Category | 40/85/21 | |||||||||||||
| Rated Voltage | 100VDC | |||||||||||||
| Capacitance Range | 220nF | |||||||||||||
| Capacitance Tolerance | ±5%(J) | |||||||||||||
| Voltage proof | 1.6UR(5s) | |||||||||||||
| Dissipation Factor | ≤0.1%(20℃, 1KHz) | |||||||||||||
| Insulation Resistance | C≥0.33 uF | C≤ 0.33 uF | ||||||||||||
| UR >100V | UR≤ 100V | UR >100V | UR≤ 100V | |||||||||||
| 2500S | 1250S | 7500MΩ | 3750MΩ | |||||||||||
Packing:
Bulk, Ammo, T&R
Part Number System
OUTSIDE MARKS FOR CAPACITANCE:
| PF | 100 | 1000 | 10000 | 100000 | 1000000 |
| NF | 0.1 | 1.0 | 10.0 | 100.0 | 1000.0 |
| μF | 0.0001 | 0.001 | 0.01 | 0.1 | 1.0 |
| Code | 101 | 102 | 103 | 104 | 105 |
TEST CONDITION
| Dash | Item | Test Conditions | Requirement | ||||||
| 1 | Tolerance | Frequency:1KHZ ±0.1KHZ ce:≤1Vrms | ±5%(J)±10%(K) | ||||||
| 2 | Dissipation | Frequency:1KHZ ±0.1KHZ Test Voltage:≤1Vrms | ≤0.65% | ||||||
| 3 | Insulation Resistanc | Insulation Resistance:10V±1V Temperature :20℃±15℃ Test Time:60±5sec | C≤.33UF CR≥7500MΩ C≥.33UF IR*C≥2500S | ||||||
| 4 | Withstanding Voltage | Leads : 1.6UR for 5sec Leads & Case: 2UR for 5sec | No breakdown or flashover | ||||||
| 5 | Suitability to Variable Temperatures | Temperature :θA=-55℃,θB=+85℃ Duration for each climate:30min Interval:2～3min Test Times:5 times | No visible damage Δc/c≤5% tgδ≤1.0% | ||||||
| 6 | Lead Tensile Strength | Lead Tension:
| No mechanical damage, such as leads breakage, loose. | ||||||
| 7 | Wire bending strength | (Half of leads uncovered),Pressure:
Continously bent twice to both opposite directions at angle of 90 ° | No mechanical damage, such as leads breakage, loose. | ||||||
| 8 | Weldability | Solder temperature:235℃±5℃ Solder time:2.0±0.5sec Solder:Green material(Pb-free) Flux:25/75(Rosin / spirits) | 90% of tin in surface | ||||||
| 9 | Wet Soldering Method | Wet Soldering Method Solder at 260±5℃ Soaking time:10±2sec Insulation plate thickness:1.5±0.5mm | c/c≤2% No visible damage | ||||||
| 10 | Vibration | Frequency:100～500HZ Direction and Time:2h for each of three different directions Amplitude: 0.75mm: During 30 min of each test at one direction, do electrical tesst for step contact, open or short . | No visible damage; No step contact last for or over 0.5ms; no open or short case | ||||||
| 11 | Damp Heat | Temperature:40±2℃ Relative Temperature:90～95% Voltage Condition:Rated Voltage Lasting Time:500h Capacitors need be at standard atmospheric pressure for 1~2 hours before test | No visible damage ΔC/C≤5% tgδ≤1.0% C≤.33UF CR≥7500MΩ C≥.33UF ≥2500S |
| NO. | ITEM | PERFORMANCE | TEST CONDITIONS | |
| 12. | High Temperature Loading | Appearance | Shall be no remarkable change. | Testing method per IEC 60384-17. Refer to JIS C 5102-1994. Test Temperature : +85 +/-2oC. Apply 150% of rated voltage for 1,000 +48/-0hrs; After test, allow it stay alone for 1.5 +/- 0.5 hrs at standard temperature and humidity before making measurements. |
| Withstand Voltage | Shall satisfy No. 4. | |||
| Capacitance Change Rate (△C/C) | Within +/- 3% of the value before test. | |||
| Dissipation Factor | Tanδ:0.65% max. (1KHz) | |||
| Insulation Resistance (I.R.) | >= 50% of the limit value of No. 3. | |||
| 13. | Damp Heat Loading | Appearance | Shall be no remarkable change. The marking shall be legible. | Refer to JIS C 0022. Test temperature :+40 +/- 2℃ Test humidity : 90% to 95% R.H. Test voltage : rated voltage. Test duration : 500 +24/-0 hrs. After test, allow it stay alone for 1.5 +/- 0.5 hrs at standard temperature and humidity before making measurements. |
| Withstand Voltage | Shall satisfy No. 4. | |||
| Capacitance Change Rate (△C/C) | Within +/- 3% of the value before test. | |||
| Dissipation Factor | Tanδ:0.65% max. (1KHz) | |||
| Insulation Resistance (I.R.) | >= 50% of the limit value of No.3. | |||
| 14. | Soldering Heat Resistance | Appearance | Shall be no remarkable change. The marking shall be legible. | Testing method per IEC 68-2-20 Tb. Soldering Temperature : +270 +/- 5oC. Immersion Duration : 3 +/- 0.5 sec. Immersion Depth : 4 +/- 0.8 mm from roots. After test, allow it stay alone for 1.5 +/- 0.5 hrs. at standard temperature and humidity before making measurements. |
| Withstand Voltage Between Terminals | Shall satisfy No. 4. | |||
| Capacitance Change Rate (△C/C) | Within +/- 3% of the value before test. | |||
| Dissipation Factor | Tanδ:0.65% max. (1KHz) | |||
| Insulation Resistance (I.R.) | >= 50% of the limit value of No. 3. | |||
| Connection of Element | Shall be stable. | |||
| 15. | Dry Heat Resistance | Appearance | Shall be no remarkable change. | Test Temperature : +85 +/- 2oC Test Duration : 16 +1/-0 hrs. |
| Withstand Voltage | Shall satisfy No. 4. | |||
| Capacitance Change Rate (△C/C) | Within +/-3% of the value before test. | |||
| Dissipation Factor | Tanδ:0.65% max. (1KHz) | |||
| Insulation Resistance (I.R.) | >= 50% of the limit value of No.3. | |||
| 16. | Cold Resistance | Appearance | Shall be no remarkable change. | Test Temperature : -40+/-2 oC Test Duration : 2 +/-1 hrs. |
| Withstand Voltage | Shall satisfy No. 4. | |||
| Capacitance Change Rate (△C/C) | Within +/-3% of the value before test. | |||
| Dissipation Factor | Tanδ:0.1% max. (1KHz) | |||
| Insulation Resistance (I.R.) | >= 50% of the limit value of No.3. | |||
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality.
Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production
average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than
that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a
quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.
