Active Member
|
[China]
Address: Rm. 3306, Int'l Tech Bldg., No. 3007, Shennan Middle Road, Shenzhen, Guangdong, China
Contact name:Tina
Shenzhen Topmay Electronic Co., Ltd. |
|
|
Double Sided High Voltage Metallized Polypropylene Capacitor MMKP82 104J2000V
Features
Configuration
With polypropylene fime dielectric,pole with double sided metallized polyester film,
twain section spray-metal form Non-inductive configuration,
Electrode lead unilateralism fetch out and fame retardant epoxy resindip sealed.
Main applications
Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
Specifications
Reference Standard | GB/T 10190(IEC 60384-16) | |
Climatic Category | 40/85/21 | |
Operating Temperature Range | -40℃~85℃ | |
Rated Voltage | 250V, 400V, 630V, 1000V, 1600V, 2000V | |
| Voltage between terminals | 2Un 1 Os | |
| Dissipation Factor | 4.0X 10-4 CR≤1 µ F 6.0X 10-4 CR>1 µ F Measured at 100Hz 25' | |
Capacitance Range | 0.0022uF~10uF | |
Capacitance Tolerance | ±5%(J), ±10%(K), ±20%(M) | |
| Insulation resistance | ≥100 000 hours CR≤0.33µ F CxRi≥30000s CR> 0.33 µ F 100Vdc 25℃ | |
Our series of strong products of capacitors can be divided into below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65, CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in , Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
And series of resistors which we develop new production lines are as below:
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality.
Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production
average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than
that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a
quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.
