Polypropylene Audio Film Capacitors High End 25nF 1KVDC Axial

Polypropylene Film Capacitor For Use In High-End Audio System 25nF 1KVDC Axial

Audio capacitors are optimized to meet the needs of today’s high-end audio systems. Polypropylene film capacitors are used in audio circuits of high-end systems for a wide array of applications. 

High-end audio capacitor: better sound quality

An audio-grade capacitor's goal is to minimize the amount of distortion and feedback between the audio and power signal. In short, the higher the quality of the capacity, the better the sound will be.

Feature:

• Tolerances available from ±10 to ±20%
• Voltages from 100 VDC to 2000 VDC
• Frequencies up to 100 KHz
• Extended electrode construction or non-inductively wound extended foil construction with standard tin-coated, oxygen-free solid copper leads
• Epoxy Resin end fills meet or exceed flammability requirements 

Configuration

Non-inductive, wound with metallized polypropylene film as the dielectric and electrode,  copper-clad steel leads or flexiable cord,  for easy solder, outer wrapped of polypropelene and end sealed with epoxy resin.

Application

Widely used in communication equipment, radio, television, power supply, instruments and other products.

Referance Standard		GB 10190-88(IEC 60384-16)
Operating Temperature		-40℃~ +105℃
Rated Voltage		1000VDC
Capacitance Range		25nF
Capacitance Tolerance		±10%(K)
Voltage proof		1.6UR(5s)
Dissipation Factor		≤0.1%(20℃, 1KHz)
Insulation Resistance		≥25000MΩ (CR≤ 0.33 uF) ≥7500S (CR≥0.33 uF) (20℃,1min)

Size for reference:  Can be customized according to customer demand processing

Product Pictures 

FAQ Of Topmay Capacitor

1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality. Freight cost is collected.

2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production average time takes 15-20 working days

3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs

4) How about price terms?

We do FOBSHENZHEN if order amount is more than 5000USD. Less than that, it is EXWSHENZHEN and we do not undertake local charge.

5) What information should I let you know if I want to get a quotation?

Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.