Active Member
|
[China]
Address: Rm. 3306, Int'l Tech Bldg., No. 3007, Shennan Middle Road, Shenzhen, Guangdong, China
Contact name:Tina
Shenzhen Topmay Electronic Co., Ltd. |
|
|
MOV Metal Oxide Varistor 14D471K 20D471K Varistor Voltage 470 (423～517)
Metal Oxide Varistor (MOV) as one nonlinear resistance element is mainly made of zinc oxide (ZnO), which has very high surge capacity and big non-linear coefficient. Below the threshold voltage, its resistance is very high, nearly no current flows through, but above the threshold voltage, the resistance reduce sharply, huge current can be discharged. Due to this characteristic, varistor as a protection component in electronic and electrical equipment can absorb abnormal over-voltage and lightning surge.
ETOPMAY varistor is with High Surge Current Density, Low Clamping Voltage, and Good Surge Capacity. It can also be customized as required.
Features:
Application
Part Number
| TMRSS01 | - | 1 2 | 3 | 4 5 6 | 7 | 8 | ||
| Produce Code TMRSS01: Metal Oxide Varistors | Disc Diameter: 05=5mm; 07=7mm 10=10mm;14=14mm 20=20mm | Type: D: Disk S: Square | Nominal Varistor Voltage: 180=18V 220=22V … 101=100V 431=430V 182=1800V ... | Tolerance: K=±10% | Packaging:T:tape&reel B:bulk | |||
| - | ||||||||
Electriacl Characteristics
| Type Number | Maximum Allowable Voltage | Varistor Voltage | Maximum Clamping Voltage | Withstanding Surge Current | Maximum Energy (10/1000μs) | Rated Power | Typical Capacitance (Reference) | |||||
| Standard | High Surge | Vac(V) | Vdc(V) | V1mA(V) | Ip(A) | Vc(V) | I(A) Standard | I(A) High Surge | (J) Standard | (J) High Surge | (W) | @1KHz(pf) |
| 14D471K | 14D471KJ | 300 | 385 | 470(423~517) | 50 | 775 | 4500 | 6000 | 125 | 175 | 0.6 | 430 |
| 20D471K | 20D471KJ | 300 | 385 | 470(423~517) | 100 | 775 | 6500 | 10000 | 220 | 350 | 1 | 850 |
Packing Dimensions
| Symble | Dimensions(mm) | ||
| H(max.) | 26.5 | ||
| H1(max.) | 28 | ||
| L(min.) | 20 | ||
| L1(min.) | 15 | ||
| D(max.) | 23 | ||
| D1(±0.8) | 7.5+0.8/10.0+1.0 | ||
| T(max.) | 6.9 | ||
| d(±0.05) | 0.8 | ||
| d1(±0.4) | 1.4 |
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality.
Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production
average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than
that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a
quotation?
Basically for capacitor, it requires to know detailed capacitance
and voltage. If you have more information, such as type, product
photo for reference, you could kindly provide too.
Our series of strong products of capacitors can be divided into
below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65,
CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in ,
Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
And series of resistors which we develop new production lines are
as below:
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor
More details, kindly contact us freely!
