Guangzhou Soger Electronics Co.,Ltd |
Verified Suppliers
|
UTP Type LSZH Cat6 Lan Cable BC 0.57mm 23AWG
Description:
The network cable from the router of the home to the computer is generally not longer than 50 meters, but the length of the network cable from the hub (switch) of the residential or residential building to the residential line of the residential unit is no problem. If the network cable exceeds 90 meters, the network signal will be attenuated. The increase of interference along the road makes the transmission data easy to make mistakes, which may cause the network to jam, the webpage to be in error, etc., causing the Internet to slow down the feeling of the network speed, but the actual network speed (data transmission speed) is not slow, but the data is wrong. After that, the network detection mechanism requires that the error frame be returned.
Specification:
Wire Core Material: Bare Copper Wire
Conductor Type: Solid
Conductor Size: 23AWG(0.54mm to 0.58mm)
Insulation Material: HDPE
Structure: 4 Unshielded Twisted Pair
Filling Compound: Non / Gel filled / Water blocking tap(Optional)
Shield Structure: Aluminium Foil Overall(Optional)
Sheath Material: PVC / LDPE / LSZH (customize)
Material Shape: Round Wire
Model: F/UTP, S/FTP, U/UTP (Optional)
Electrical characteristics:
Communicate rate: 83%
Insulated Resistance: ≥5000MΏ.km
Working temperatures: -20-75°C
Impedance: 93.8 ±15%Ω at 1 to 100MHz
Transmission Characteristic: Reference YD/T322-1996
Reference standard: YD/t1019-2001; UL758; UL1581; UL444; TIA/EIA-568; CSA C22.2 ;
ISO/IEC11801; (Performance and superior to the above standards)
Item | Structure (mm) | Insulation thickness (mm) | Approx overall dia. (mm) |
UTP CAT5E | 4x0.48 | 0.90 | 5.2 |
UTP CAT5E | 4x0.50 | 0.91 | 5.3 |
UTP CAT5E | 4x0.52 | 0.93 | 5.3 |
FTP CAT5E | 4x0.48 | 0.92 | 6.4 |
FTP CAT5E | 4x0.50 | 0.94 | 6.5 |
FTP CAT5E | 4x0.52 | 0.96 | 6.5 |
UTP CAT6 | 4x0.50 | 0.96 | 6.3 |
UTP CAT6 | 4x0.55 | 1.01 | 6.4 |
UTP CAT6 | 4x0.57 | 1.03 | 6.4 |
FTP CAT6 | 4x0.50 | 0.98 | 7.3 |
FTP CAT6 | 4x0.55 | 1.03 | 7.4 |
FTP CAT6 | 4x0.57 | 1.05 | 7.4 |
There are two standards for twisted pair termination: T568A and
T568B, and there are two main methods for connecting twisted pairs:
straight-through cable and crossover cable. The two ends of the
crystal head of the straight-through cable follow the T568B
standard. Each line of the twisted pair has one-to-one
correspondence at both ends, and the same color is consistent in
the corresponding slots of the crystal heads at both ends. It is
mainly used in the switch (or hub) Uplink port to connect to the
switch (or hub) common port or switch common port to the computer
network card. The end of the crystal head of the crossover cable
follows 568A, while the other end uses the 568B standard, that is,
the 1 and 2 of the A crystal head correspond to the 3, 6 of the B
crystal head, and the 3 and 6 of the A crystal head correspond to
the 1 of the B crystal head. 2, it is mainly used in the switch (or
hub) common port to connect to the switch (or hub) common port or
network card to the network card.
When the horizontal line is terminated in the integrated wiring
project, GB 50312 accepts T568B or T568A, but it is not allowed to
install at the same time, usually terminated by T568B.