SHENZHEN BLG DIGITAL NETWORK CO., LIMITED |
|
Cat6 UTP Patch Cord Cable 26AWG 24AWG Stranded BC CCA with 8P8C RJ45 3FT 5FT 7FT
A patch cable or patch cord or patch lead is an electrical or optical cable used to connect ( " patch - in " ) one electronic or optical device to another for signal routing. Devices of different types ( e. g. , a switch connected to a computer, or a switch to a router ) are connected with patch cords. Patch cords are usually produced in many different colors so as to be easily distinguishable, and are relatively short.
Application | 1. Computer network cabling project 2. Broadband network communication 3. Digital ISDN and ATM 1000Mbps network 4. Ethernet network 5. Audio and data transmission |
QUALITY CONTROL - Each Cat 6 internet cable 6 ft goes through rigorous testing to ensure a secure wired internet connection with exceptional speed and reliability.
PERFORMANCE - High performance Cat6 ethernet patch cables are designed with
extremely well-matched components for outstanding uniform impedance
and very low return loss, providing lower crosstalk, and a higher
signal-to-noise ratio. They support frequencies of up to 500 MHz
and are suitable for high-speed 10GBASE-T internet connection for
LAN network applications such as PCs, servers, printers, routers,
switch boxes, and more, while remaining fully backward compatible
with your existing network.
CERTIFICATION - Cat6 Ethernet cable with CM grade PVC jacket is listed, complies
with TIA/EIA 568-C.2, is ETL verified and RoHS compliant.
CONFIGURATION - The cat 6 ethernet patch cable features 8 stranded bare copper
conductors 24 AWG. Each of the 4 unshielded twisted pairs (UTP) are
separated by a PE cross insulation to isolates pairs and prevent
crosstalk and covered by a 5.8mm PVC jacket with RJ45 connectors
and gold-plated contacts. The molded strain relief boots help avoid
snags that will damage your cables. They are molded for flexibility
and resist common wear and tear.
FEATURES | ||
TIA / EIA - 568B. 2 - 1; ISO / IEO 11801; NEC / CEC | ||
Fire Protection - IEC60332 - 1 (CM) | ||
Application: Horizontal Communication Cable; for Indoor Installation | ||
Wiring Scheme | ||
ANSI / TIA / EIA - 568 - C. 2: T568A & T568B; ISO / IEC 11801 | ||
8 - Position Conductor / Pair Assignment | ||
T568B: 1 - 2 / 3 - 6 / 4 - 5 / 7 - 8 | ||
T568A: 3 - 6 / 1 - 2 / 4 - 5 / 7 - 8 | ||
CORDAGE | ||
Construction: 4 Pairs, Solid or 7 Strands, 24AWG, UTP | Pair Identification: Pair 1= Blue / Blue White Pair 2= Orange / Orange White Pair 3= Green / Green White Pair 4= Brown / Brown White | |
Cable Type: UTP Cat6 Patch Cable | ||
Outer Cable Diameter: 6.0mm ± 0.2 mm | Outer Jacket: PVC / LSZH Jacket | |
PLUG: | ||
Item: RJ45 8P8C Modular Plug | ||
Type: Unshield | ||
IDC Blades: Phosphor Bronze, 100 micro inches nickel under plated & Gold selected | ||
MECHANICAL | ||
Retention: 50 N (11 lbf) for 60±5 s | Installation Temperature: 0 °C to + 60 °C | |
Mating cycle life: min 750 cycles | Operating temperature: - 20 °C to + 60 °C | |
Tensile strength: ≥ 20 N per wire | Minimum bend radius: 4 outer cable diameters | |
Boot Type: Any type of the above picture | ||
Length: 0.3m - 50m or As per requested | ||
Color: Grey / Green / Blue / White / Black / Red / Yellow | ||
Package: Polyester bag or Blister Package |