Shenzhen Xin Xin Da Communication Technology ltd |
|
F/FTP CAT6A Patch cord
7*0.2mm Pure Copper
Foam PE insulation
AL Foil Shielded
RoHS PVC Jacket
Both end with RJ45 plug
Past Fluke test
Any color available
Any length could be choose
It is a fast and dependable Ethernet connection solution. This unshielded twisted 4-pair cable meets performance requirements for a category 6A networking patch cable. The ethernet cable comes fitted with male RJ45 connectors on both ends. Advance your system with this snagless patch cable and enjoy clean and clear transmissions.
Category 6A Networking Ethernet Cable:
550 MHz Category 6A Patch Cord (F/FTP)
4 Twisted Pairs
23 AWG
Type: CM
EIA/TIA TSB-40A ETL Verified
50u" (Short Gold Plated Bodies)
Molded Strain Relief
Stranded 568B
RoHS Compliant
UL listed
Quick Detail:
Name | Feature | Application | Conductor | Connector | Jacket |
F/FTP PATCH CABLE | Shielded twisted paired cable | 100 Base-T4 | 7*0.2mm 7*0.16mm 7*0.12mm pure copper | 8P8C RJ45 plug | NEW PVC jacket |
Description:
Ethernet Patch Cables
AWG24 / 26 / 28 AWG
Conductor ConstructionPure Copper / Bare Copper / CCA
Flame Retardant TestCMH
Contact Gold Plating1u" - 50u"
Jacket MaterialPVC / LSZH
RoHS CompliantYes
Ethernet over twisted pair technologies use twisted-pair cable for
the physical layer of an Ethernet computer network. Other Ethernet
cable standards employ coaxial cable or optical fiber. Early
versions developed in the 1980s included StarLAN followed by 10BASE-T. By the 1990s, fast, inexpensive technologies
began to emerge. Currently the most popular are 100BASE-TX (fast
Ethernet; 100 Mbit/s) and 1000BASE-T(gigabit Ethernet; 1 Gbit/s).
These standards all use 8P8C connectors. Meanwhile higher-speed
implementations generally support lower-speed standards
inclusively; thus it is possible to mix different generations of
equipment. Inclusive capability is designated 10/100 or
10/100/1000- for connections that support such combinations.The
cables usually have four pairs of wires (though 10BASE-T and
100BASE-TX only require two of the pairs). The three standards
support both full-duplex and half-duplex communication. High-grade
twisted pair cabling can transport up to 10 Gbit/s Ethernet
(10GBASE-T