TIANJIN ESTEL ELECTRONIC SCIENCE AND TECHNOLOGY CO., LTD |
|
The outdoor thermostatic battery cabinet is designed to separate the battery working environment in base stations, and to create an individual thermostatic environment for batteries so as to increase the working temperature inside the base station, which is aimed at reducing power consumption and saving cost.
The outdoor battery cabinet is made up of three parts: the
thermostatic cabinet, air conditioner, and controller. The
thermostatic cabinet with the function of seal and insulation, which is used for installing batteries, has
ventilation for exhausting hydrogen generated by batteries. The
thermostatic cabinet can hold 24 2V batteries. The size can be
custom made. The air conditioner uses compressor cooling to adjust
temperature inside the cabinet. The controller individually
controls the temperature of the battery cabinet, to make sure the
thermostatic working environment for the batteries so as to ensure
the service life of the batteries, and increase the temperature of
main equipments and power equipments in the base station so as to
reduce power consumption.
Technical specs:
1. Environment:
Storage temperature: -40°C-- 70°C
Working temperature: -30°C-- 50°C
Storage humidity: ≤95%
Working humidity: ≤90%
Allowed altitude: 4000m
2. Power supply:
Two options:
(1)220V AC ( -15%-- +10%, 50±5%Hz)
(2)48VDC (-40VDC--65VDC)
3. Power:
(1) Controller power: ≤5W
(2) Air conditioner power:
Max operating power consumption: 300W;
Long running power consumption: ≤80W
4. External size: 1600×1300×700 (W×H×D)
5. The cabinet has two doors, convenient for batteries maintenance.
6. Integrated heat transfer coefficient: ≤0.4W/(m2.K)
Features:
1.The temperature inside the thermostatic cabinet can be controlled at the range: 15°C-- 25°C.
2.Through the air conditioner controller, the thermostatic cabinet
controller can control and adjust the air conditioner temperature
inside the equipment room, and increase the working temperature
inside the equipment room to 30°C-- 40°C(the temperature is
adjustable).
3.The cabinet can hold 24 2V batteries. (custom made)
4.The cabinet is installed with hydrogen exhaust and ventilation
system, which can exhaust hydrogen at time set by the controller,
and realize exchange of inside cabinet air and outside cabinet air.
5.The cabinet, with perfect air distribution design, can ensure the
temperature of each battery inside the cabinet is constant and
consistent.
6.The cabinet is equipped with failure alarm, When system equipment
failure is detected, the alarm will start and will be transmitted
through the controller to the monitoring center.
7.The cabinet is equipped with open door alarm. When unauthorized
person open the door, it will automatically report the alarm.
8.The cabinet has RS485 remote monitoring access port.
9.The cabinet is with good heat insulation function. There’re heat
insulation layer installed on the top, bottom, side, front and back
of the cabinet. The cable outlet hole has insulating bushing. The
hydrogen exhaust circulation system is treated with special
technology, which can ensure the seal and heat insulation function
of the cabinet is not affected.