Active Member
|
[China]
Address: 7D，Block A, Olympic Building, 8th Chang An North Road, Xi'an, Shaanxi,China
Contact name:Cherry
Xi'an Excellent Electromechnical Co.,Ltd |
|
|
ECW XZ3Elevator Lifting Weighing Devices, Elevator Load Weighing Parts Elevator Spare Parts ECW XZ3Elevator Lifting Weighing Devices, Elevator Load Weighing Parts Elevator Spare Parts
One set including controller ECW-XZ3 and load sensor ECW-GA
Application Range Being applicable to all traction elevators with fixed car platform with the load of 500kg~3000kg
Landing Compensation Method Auto adapting intelligent fuzzy compensation
Sensitivity Elevator Rated Capacity/200 (Example: The rated capacity is 1000kg, and the
sensitivity is 5kg ) [This data may be affected by elevator mechanical performance.]
System Error ≤0.5% (5~40 centigrade )
Non-linearity ≤0.5%
Output Mode 1.2-channel programmable output modes are: No load, light load, semi full load, heavy load, rated
load, overload (customer may set the changing range freely).
2.Each channel can be programmed as dynamic Close or Open contact.
3.Contact Capacity: DC/AC 48V/100mA.
Analogue output :It performs linear change (0~10V) when Elevator load is changing
from “no load~rated load”.
Operation Ambient Temperature -20~55 centigrade centigrade
Relative Humidity Reaction 20%~90%RH
Reaction Time ≤0.3Second
Power Supply AC/DC24(±10%)V/200mA
Install Position Sensor Section:At the place of traction rope shackle
Controller Section:Control Cabinet in machineroom. See the attached
figure for installing dimensions.
Overall Size Sensor Section:See the figure;Controller Section:See the figure
M:The intension exceeding the limit parameters listed above may result in the abnormality or permanent damage to the system.
Main Characteristics:
