CE Approval 7 Digits Lightning Strike Counter Exchangeable 3V Battery Support

CE approval 7 digits advanced lightning strike counter price - competitive

TSTLP TS-SLC3D 7-Digit Advanced Lightning Strike Counter is designed for easy mounting on a down conductor (Grounding Line) to effectively count the times of lightning/surge current discharged by ESE thunder arrester or surge protection devices - recording exact TIMES , DATE & TIME. And it does NOT require the use of any external power source.

• Relative TSTLP Series Lightning Strike Counters

• Technical Data

• Main Character

1. 7-digit Display (0~9999999) advanced lightning strike counter
2. Circel Ring Inductor used with PE line of Power SPD / Flat Inductor used with down conductor of ESE Air Terminal
3. Powered by replaceable 3.0V Lithium battery, 0 96 inches ,128*64 resolution OLED display.
4. TS-SLC3D advanced lightning counter could NOT ONLY count the lightning strike TIMES , BUT ALSO record exact DATE & TIME striken at the same time

• Installation Instructions

1. There is an insulated transparent tape attached to the battery, pull the tape“Battery on PULL” before installation to ensure the power supply works smoothly.
2. If Equipped with Inductive Ring: Open the inductive ring and clamp the earthing wire, then fix the SPD on the 35mm DIN rail. As show in the following installation diagram. If Equipped with Flat Inductor: Attach the flat inductor directly with the down conductor of ese lightning rod.
3. Fault resolution: when the product indicates default,still reset or even no indication, open the bottom enclosure,unplug the internal battery for about 5 minutes and then assemble it back, pay attention to the battery and its holder's positive(+) and negative (-)accordingly. In this condition, it will display and work normally then do the reset(for test).

• Installation Diagram

• Real Installation

PDF Datasheet Download - TSTLP TS-SLC3D 7-Digit Ad...

Tag: lightning strike counter, lightning strike counter price