Active Member
|
[China]
Address: KHJ Industrial park, Building 1,Chuangxin Industrial park, Xintian community, Guanlan, Longhua new district, Shenzhen,China 518110
Contact name:Karina
Shenzhen KHJ Technology Co., Ltd |
|
|
KD9966 polyimide adhesive tape features unrivaled heat protection with outstanding heat resistance and low static discharge properties for unrivalled protection from high heat levels and static charge discharge.
Features an extremely low electrostatic discharge upon unwind and removal.
High temperature resistant up to 280 for 10 minutes.
Outstanding Tensile Strength and Elongation Properties.
Application (ROHS compliant). A mask designed to shield printed circuit boards during wave solder or solder dip processes;
Masked contacts provide protection during spray painting, powder coating and solder coating processes;
Bundling transformers, motors, batteries & electronic components together for transport is increasingly being done for ease of storage or shipping purposes.
| Item | Typical Value | Test Method | |
| Imperial | Metric | ||
| Backing | 1.0mil | 0.025mm | / |
| Total Thickness | 2.0mil | 0.050±0.005mm | / |
| Tack | / | ≥26(J.DOW/#) | / |
| Adhesion to Steel | 0.91~1.37lbs/in | 4~6N/25mm | GBT 2792-2014 |
| Tensile Strength | ≥20lbs/in | ≥3.5 (KN/M) | GBT 30776-2014 |
| Elongation | ≥45% | ≥45% | GBT 30776-2014 |
| Surface Resistance | 106~8ohms | 106~8ohms | / |
| Static Discharge | <100V | <100V | / |
| Maximum Operating Temperature | 536 ℉ | 280℃ | / |
Store between 10%-33% RH and 40-70% relative humidity for maximum shelf life of at least 12 months from date of production when stored as indicated above.
Prior to applying pressure using roller, hand, or press, surfaces must be clean, dry, and free from dust, oil or other contaminants that might reduce adhesion levels or result in repetitive sticking which would decrease adhesion levels. Repeat sticking should also be avoided to maintain optimal adhesion levels without decreasing them further over time.
Please be aware that this technical data sheet was written based solely on laboratory tests and experience rather than considering specific customer application needs. Ultimately it's up to the customer to ascertain if a product meets these criteria prior to being accepted for use.
