|
[China]
Trade Verify
Address: CCSP Industral Park. Qingshan Road, Yuelu District Changsha City. Hunan Province. China
Contact name:Emily
Hunan CTS Technology Co,.ltd |
|
Verified Suppliers
|
|
|
>>>Standard EV Battery Module for
>>>For Electric Bus and Heavy Truck
>>>Support Max 600KWH System
| MODEL | F128206 | F128230 | F153206 | F153230 |
| ELECTRICAL SPECIFICATIONS | ||||
| Cell Type - Chemistry | 3.2V 206ah | 3.2V 230ah | 3.2V 206ah | 3.2V 230ah |
| Rated Capacity | 206Ah | 230Ah | 206Ah | 230Ah |
| Rated Voltage | 128V | 128V | 153.6V | 153.6V |
| Energy | 26.386kWh | 29.44kWh | 31.16kWh | 35.328kWh |
| IP Proetction | IP67 | |||
| Cycle life | >3000cycles(90%DOD, 0.5C) | |||
| MECHANICAL SPECIFICATIONS | ||||
| Dimensions (L x W x H) | Within L1060*W630*H245mm | |||
| Weight | <=230Kg | |||
| DISCHARGE/CHARGE SPECIFICATIONS | ||||
| Discharge Cut-off Voltage | 100V | 100V | 120V | 120V |
| Max Continuous Discharging | 1C | |||
| Peak Discharge Current | 2C/30s; 3C/5s | |||
| Recommended Discharge Current | 0.5C | |||
| CHARGE SPECIFICATIONS | ||||
| Charging Limited Voltage | 146V | 146V | 175.2V | 175.2V |
| Max Charging Current | 1C | |||
| Recommended Charge Current | 0.5C | |||
| TEMPERATURE SPECIFICATIONS | ||||
| Self discharge rate | ≤ 3 %/month | |||
| Charge Temperature Range | 0~50ºC | |||
| Discharge Temperature Range | -20~60ºC | |||
| Recommended Operating Temp | 15~35ºC | |||
| Storage Temperature & Humidity | -20~35ºC, 45~75%RH | |||
| Range (Less than 1 month) | ||||
| Storage Temperature & Humidity | -10~35ºC, 45~75%RH | |||
| Range (Less than 3 months) | ||||
| Recommended Storage Temp. & Humidity Range | 15~35ºC, 45~75%RH | |||
| System cooling mode | Liquid cooling | |||
| MODEL | F96280 | F96302 | F115280 | F115302 |
| ELECTRICAL SPECIFICATIONS | ELECTRICAL SPECIFICATIONS | ELECTRICAL SPECIFICATIONS | ||
| Cell Type | 3.2V 280ah | 3.2V 302h | 3.2V 280ah | 3.2V 302h |
| Rated Capacity | 280Ah | 302Ah | 280Ah | 302Ah |
| Rated Voltage | 96V | 96V | 115.2V | 115.2V |
| Energy | 26.88kWh | 28.99kWh | 32.256kWh | 34.79kWh |
| IP Proetction | IP67 | |||
| Cycle life | >3000cycles(90%DOD, 0.5C) | |||
| MECHANICAL SPECIFICATIONS | ||||
| Dimensions (L x W x H) | Within L1060*W630*H245mm | |||
| Weight | <=230Kg | |||
| DISCHARGE/CHARGE SPECIFICATIONS | ||||
| Discharge Cut-off Voltage | 75V | 75V | 90V | 90V |
| Max Continuous Discharging | 1C | |||
| Peak Discharge Current | 2C/30s; 3C/5s | |||
| Recommended Discharge Current | 0.5C | |||
| CHARGE SPECIFICATIONS | ||||
| Charging Limited Voltage | 109.5V | 109.5V | 131.4V | 131.4V |
| Max Charging Current | 1C | |||
| Recommended Charge Current | 0.5C | |||
Application conditions
Ø The customer shall provide Hunan CTS with detailed design scheme, characteristic frame data format and other relevant information of the battery management system, so that CTS can evaluate the system design and establish battery management files.
Ø Without the consent of Hunan CTS , the customer shall not modify or change the design and framework of the battery management system without authorization, so as not to affect the service performance of the battery.
Ø The customer shall keep complete monitoring data of battery operation as a reference for product quality responsibility division. If there is no complete monitoring data within the service life of the battery system,Hunan CTS will not assume the responsibility for product quality assurance.
Ø Avoid charging the battery under low temperature conditions prohibited by this specification (including standard charging, fast charging, emergency charging and regenerative charging), otherwise Unexpected capacity reduction can occur. The battery management system shall be controlled according to the minimum charging and regenerative charging temperature. It is prohibited to charge at a temperature lower than that specified in this specification, otherwise,CTS will not assume the responsibility for quality protection.
Ø Avoid battery over discharge. When the battery voltage is lower than 2.0 V, the battery interior may be permanently damaged. At this time, the product quality assurance responsibility of CTS is invalid. The customer needs to train the user to recharge in the shortest time to prevent the battery from entering the overdischarge state.
Our standard module widely used in the public bus, industry
vehicle, like mining truck, Tunnel vehicle,
large capacity AGV, kyline crane. We have extensive experience in
different market.
lf you have any question,please contact us, we will provide the
proper solution for you!
Since 2011, CTS has focused on one-stop customization of lithium
battery products such as electric vehicle
batteries, large energy storage batteries, smart home storage
batteries, high-end electric motorcycle batteries
and so on. We have more 30 types of cells, and could make OEM
battery pack from 12v-800v, 10-200ah,
which can be used in electric vehicle, E-bike, UPS, energy storage
system, telecommunication base station,
E-scooter, E-tools,unmanned airplane, golf cart, fork lift,
cleaning car , electric wheelchair, etc.
We has been pursuing quality policy of continuous innovation and
improvement to meet customer's requirements.
To realized full automation, we has introduced advanced foreign
equipment and technology from Korea and
Germany. To ensure the best quality, we has passed I S O 9 0 0 1 , I S O 1 4 0 0 1 and O H S A S 1 8 0 0 1
certifications. We stick to the company concept of human
orientation and efficient innovation and we welcome
customization. So, lets join together to promote the development of
renewable energy and friendly environment.
