Galvanised Steel Pipe Milling Machine 100m / Min Mill Speed FF Forming 1 Year Warranty

80x80mm Full automatic High precision direct to square tube mill with 4.0mm thickness
 

Production Process

Scroll up → Uncoil → Flattening → End Shear & Butt Welding → Accumulator → Forming → High-frequency induction welding→ Removing external burr → Cooling → Sizing → Cutting → Checking & Collecting → Accessing Warehouse

Specifications:

Raw materials: Low carbon steel and low alloy constructional steel,σb≤580Mpa σs≤380Mpa
Steel strip width:320-800mm
Steel strip thickness:3.0-12.7 mm
Steel strip inner diameter:φ480-580mm
Steel strip outer diameter:φ800-1800mm
Steel coil weight (Max):12t
Raw material on behalf of the steel grade: Q195-Q345,SPHC
Raw material quality standards::Mainly in GB standards, parts with JIS,DIN
Thickness(Max):5.0mm,thickness 1.5mm
main product specifications
Square pipe 80×80—200×200(any size in this range)
Rectangular 80×120-120×280 (any size in this range),Rectangular tube all adopt vertical forming type
Wall Thickness:3.0-12.7mm
Length:4-12m
Unit feed direction:left or right (face the operate side)
Rolling line elevation:+900mm
Forming speed:10-40m/min
Main motor: Frequency conversion motor 22KW×2 Each stand times

Equipment description
 
80x80mm Full automatic High precision direct to square tube mill with 4.0mm thickness  
is the first full-automatic pipe making machine in china to meet the requirements of the international market, according to our company LW series unit combined with FF forming technology, developed the automatic square and rectangular tube equipment. The pipe making machine can produce a certain specification of opening cold bend steel, such as U,C section steel etc., width and height of the product can be adjusted infinitely. The steel making machine is used to scale to cut off the steel tubes, the incision level off, smooth, without burr, scale with high precision.
 
The pipe machine’s main characteristics of the equipment
 
1. In a very short period of time to finish the adjustment of the roller
2. producing the different specifications of the tube, only need to adjust
3. decreasing the number of workers, reduce the labor costs
4. improve the service life of the equipment.
5. The machine can be repaired alone.
 
Welded pipe making machine consists of the following parts
 
1. Forming parts: Consist of seven frame of horizontal roll stands, four stands of empty curving stands, four stands of vertical roll rack and one stand of feeding rack
2. Welding parts: consists of welding five roller of extruding roll, two frame of scraping scar rack and one frame of polish rack
3. Sharping parts: consists of four frame of four roller rack
4. Electric control part: controlled by multipoint PLC control